Strip mine

Surface mining, including strip mining, open-pit mining and mountaintop removal mining, is a broad category of mining in which soil and rock overlying the mineral deposit (the overburden) are removed. In contrast to underground mining, in which the overlying rock is left in place, and the mineral removed through shafts or tunnels.

Surface mining began in the mid-sixteenth century and is practiced throughout the world, although the majority of surface coal mining occurs in North America. It gained popularity throughout the 20th century, and surface mines now produce most of the coal mined in the United States.

In most forms of surface mining, heavy equipment, such as earthmovers, first remove the overburden. Next, huge machines, such as dragline excavators or Bucket wheel excavators, extract the mineral.

There are five main forms of surface mining, detailed below.

"Strip mining" is the practice of mining a seam of mineral, by first removing a long strip of overlying soil and rock (the overburden). It is most commonly used to mine coal and lignite (brown coal). Strip mining is only practical when the ore body to be excavated is relatively near the surface. This type of mining uses some of the largest machines on earth, including bucket-wheel excavators which can move as much as 12,000 cubic meters of earth per hour.

There are two forms of strip mining. The more common method is "area stripping", which is used on fairly flat terrain, to extract deposits over a large area. As each long strip is excavated, the overburden is placed in the excavation produced by the previous strip.

"Contour stripping" involves removing the overburden above the mineral seam near the outcrop in hilly terrain, where the mineral outcrop usually follows the contour of the land. Contour stripping is often followed by auger mining into the hillside, to remove more of the mineral. This method commonly leaves behind terraces in mountainsides.

...
Wikipedia