Stendal–Uelzen railway

Stendal–Uelzen
The Uelzen–Stendal route
Route number:	305
Track gauge:	1435
Voltage:	15 kV, 16.7 Hz AC
Maximum speed:	160
From Berlin From Tangermünde From Magdeburg 0.0 Stendal To Wittenberge To Wolfsburg 9.1 Steinfeld (b Stendal) Schönfeld until 1944 14.8 Kläden (Kr Stendal) 20.0 Hohenwulsch Bismark (Altm) until 1944 To Peulingen and to Kalbe 25.7 Meßdorf 32.0 Brunau-Packebusch 40.5 Fleetmark 45.0 Rademin From Osterburg 49.4 Pretzier (Altm) 49.0 From Wittenberge 53.5 Former flying junction From Dannenberg 56.0 Salzwedel freight yard From Diesdorf, Badel 57.1 Salzwedel 50.0 To Oebisfelde 70.2 Bergen (Dumme) Saxony-Anhalt–Lower Saxony state border 72.0 Nienbergen 76.2 Schnega 82.7 Varbitz 86.2 Soltendieck 90.3 Heuerstorf 93.6 From Braunschweig 93.7 Wieren Elbe Lateral Canal 98.3 Stederdorf (Kr Uelzen) From Hannover 107.5 Uelzen To Hamburg To Langwedel-Bremen

The Stendal–Uelzen railway is a mostly single-track, electrified main line and connects Stendal in the east of Altmark with Uelzen in Lower Saxony. The most important stop along the way is Salzwedel.

The Stendal–Uelzen line was originally opened in 1873 as part of a direct connection from Berlin to the naval base at Wilhelmshaven by the Magdeburg–Halberstadt Railway Company (MHE) and was opened as part of the so-called America Line.

In 1945, the line was cut by the Inner German border. West of the border a temporary terminus was created at Nienbergen as the former station in the Lower Saxon town of Bergen an der Dumme was 1,200 meters east of the Iron Curtain. The second track was removed in two phases in 1946 and the 1980s: first, the section from Wieren to Nienbergen was singled, then the second track was also removed between Wieren and Uelzen.

In the Soviet Zone, which became East Germany in 1949, trains initially ran between Stendal and Bergen. Border security measures were imposed between Salzwedel and Bergen on 7 October 1951 as Bergen station was only 1,200 meters from the border. Between Stendal and Salzwedel one of the two tracks was dismantled because the track material was supposedly needed for the construction of the Berlin outer ring.

After the fall of the Berlin Wall in 1990, the rebuilding of the Stendal–Salzwedel–Uelzen connection was added to the list of German Unity Transport Projects (Verkehrsprojekte Deutsche Einheit). The old line was completely rebuilt and established in 1999 as a single-track, electrified mainline railway and restored to operation. Part of the second track was also restored. The whole project took several years to complete. The 17.5 km long section between Brunau and district road 1005 in Klein Gartz now has two tracks and there is also an approximately one kilometre long passing loop west of the former Kläden station; the current Kläden station is now located further to the east on a single-track section. In addition, during the implementation of the German Unity Transport Project, all loading sidings near the line were dismantled and connecting sidings were reduced so that local freight movements are no longer possible on this line. The originally planned complete reconstruction of the line as a two-track line has not yet been realised.

...
Wikipedia