Project 30bis Skoryy-class destroyer
|
|
Class overview | |
---|---|
Operators: | |
Preceded by: | Ognevoy-class |
Succeeded by: | Neustrashimy class |
Built: | 1949-53 |
In service: | 1949-1984 |
Completed: | 70 |
General characteristics | |
Displacement: | 2,316 long tons (2,353 t) standard, 3,066 long tons (3,115 t) full load |
Length: | 120.5 m (395 ft 4 in) |
Beam: | 12 m (39 ft 4 in) |
Draught: | 3.9 m (12 ft 10 in) |
Propulsion: | 2 shaft geared turbines, 3 boilers 60,000 shp (44,742 kW) |
Speed: | 36.5 knots (67.6 km/h; 42.0 mph) |
Range: | 4,080 nautical miles (7,556 km; 4,695 mi) at 16 kn (30 km/h; 18 mph) |
Complement: | 286 |
Sensors and processing systems: |
|
Armament: |
|
The Skoryy class were the first destroyers built for the Soviet Navy after the end of World War II. Seventy (70) ships were built between 1949 and 1953. The Soviet designation was Project 30bis.
The ships were derived from the Project 30 Ognevoy class destroyer, but were slightly larger with better sea-keeping and significantly increased endurance. These ships were longitudinally framed and completely welded. The ships were built in 101 modular pre-fabricated sections which led to rapid building times. The machinery and main armament was essentially identical to those of the Ognevoy class destroyers but the boilers employed forced draught for increased power.
The ships were modernised in the 1950s with new anti-aircraft guns and anti-submarine mortars and updated sensors (new radar and sonar). One bank of torpedo tubes were removed and extra accommodation (deckhouses) added.
70 ships were built for both the Soviet navy and for export, this is the largest production run for any large Soviet surface warship.
Soviet ships:
Exported ships were:
The Soviet ships were decommissioned and scrapped between 1965 and 1984