Silverliner V
| Silverliner V | |
|---|---|
SEPTA No. 701 on the Chestnut Hill West Line at St. Martins station
|
|
| Manufacturer | Hyundai Rotem |
| Built at | South Philadelphia, Pennsylvania |
| Family name | Silverliner |
| Replaced | 73 Silverliner II and Silverliner III's (SEPTA) |
| Constructed | 2009-2016 |
| Entered service |
2010-present (SEPTA) 2016 (RTD) |
| Number under construction | 6 |
| Number built | Total: 180 SEPTA: 120 RTD: 60 |
| Number in service | 180 |
| Fleet numbers | SEPTA: 701-738, 801-882 RTD: 4000-4065 |
| Capacity |
SEPTA: 107 Single Car 109 Married Pair Car RTD: 91 per car |
| Operator(s) |
SEPTA Denver RTD |
| Line(s) served |
SEPTA Regional Rail Denver RTD Commuter Rail |
| Specifications | |
| Car body construction | Stainless steel |
| Car length | 85 ft 0 in (25,908 mm) |
| Width | 10 ft 5 in (3,175 mm) |
| Height | 12 ft 7 in (3,835 mm) |
| Doors | quarter point SEPTA: 3 per side, 2 with traps. RTD: 4 per side |
| Maximum speed |
Design speed: 110 mph (180 km/h) Operating speed: 100 mph (160 km/h)(SEPTA) 79 mph (127 km/h)(RTD) |
| Weight | 146,600 lb (66,500 kg) |
| Traction system | Mitsubishi Electric AC Induction motor, VVVF inverter |
| Acceleration | 3 mph/s (4.8 km/(h·s)) up to 30 mph (48 km/h) |
| Deceleration |
Service: 3 mph/s (4.8 km/(h·s)) up to 50 mph (80 km/h); 2 mph/s (3.2 km/(h·s)) @ 100 mph (160 km/h) Emergency: 3.2 mph/s (5.1 km/(h·s)) |
| Electric system(s) | SEPTA: 12.5 kV 25 Hz AC Catenary 12.5 kV 60 Hz AC Catenary SEPTA and RTD: 25 kV 60 Hz AC Catenary |
| Current collection method | Pantograph |
| AAR wheel arrangement | B-B |
| Bogies | Bolsterless, GSI 70 |
| Braking system(s) | Pneumatic, one outboard disc, one tread per wheel. Dynamic/Regenerative |
| Coupling system | WABCO Model N-2 |
| Track gauge | 1,435 mm (4 ft 8 1⁄2 in) standard gauge |
2010-present (SEPTA)
The Silverliner V is an electric railcar designed and built by Hyundai Rotem for the SEPTA Regional Rail system and is now being offered to other commuter rail providers with Denver's RTD being the second purchaser. This is the fifth generation railcar in the Silverliner family of single level EMUs.
The cars feature expanded interiors and windows, additional entrances and screens used to display information about the service. They are all ADA compliant and meet Federal Railroad Administration safety requirements.
SEPTA ordered a total of 120 cars at a cost of $274 million; the first cars arrived in the United States on 28 February 2010 from South Korea, where they were manufactured by Hyundai Rotem. The cars were built in South Korea and final assembly took place in South Philadelphia. The cars entered revenue service on 29 October 2010 and all 120 were to be completed by the end of 2011. However, due to delays that were reportedly to last until mid-2012, SEPTA is owed millions in fines for the overdue equipment.
The last of the 120 cars arrived on property for testing in February 2013.
Cars 735, 736, 871 and 872 are owned by the state of Delaware. However, they are used systemwide for service, and are not restricted to use on services to Delaware only.
On July 2, 2016, SEPTA removed all 120 of its Silverliner V cars – a third of its fleet – from service due to fatigue cracks in the trucks, leading to reduced service system-wide. On September 1, 2016 four of the cars have been put back into service on the Fox Chase Line. Week by week, 10 of these cars are expected to start gradually returning into service.
In 2010 Denver's Regional Transportation District selected the Silverliner V for its new commuter rail line. A total of 66 cars were purchased in the married pair configuration for a total of $300 million. The first four cars were delivered to Denver on December 3, 2014 with service to start in 2016.
...
Wikipedia