*** Welcome to piglix ***

Separation of a mixture


A separation process is a method to achieve any phenomenon that converts a mixture of chemical substance into two or more distinct product mixtures, which may be referred to as mixture. at least one of which is enriched in one or more of the mixture's constituents. In some cases, a separation may fully divide the mixture into its pure constituents. Separations differ in chemical properties or physical properties such as size, shape, mass, density, or chemical affinity, between the constituents of a mixture. They are often classified according to the particular differences they use to achieve separation. Usually there is only physical movement and no substantial chemical modification. If no single difference can be used to accomplish a desired separation, multiple operations will often be performed in combination to achieve the desired end.

With a few exceptions, elements or compounds are naturally found in an impure state. Often these impure raw materials must be separated into their purified components before they can be put to productive use, making separation techniques essential for the modern industrial economy. In some cases, these separations require total purification, as in the electrolysis refining of bauxite ore for aluminum metal, but a good example of an incomplete separation technique is oil refining. Crude oil occurs naturally as a mixture of various hydrocarbons and impurities. The refining process splits this mixture into other, more valuable mixtures such as natural gas, gasoline and , none of which are pure substances, but each of which must be separated from the raw crude. In both of these cases, a series of separations is necessary to obtain the desired end products. In the case of oil refining, crude is subjected to a long series of individual distillation steps, each of which produces a different product or intermediate.

Separators are used for the separation of liquid. In fact, they are vertically supported centrifuges and are built with flying bearings. They work with centrifugal force. A separator belongs to the continues sedimentation centrifuges. Both the purified liquid and the liquid separated from each other are continuously discharged by using a pump (under pressure) or pressure free. The solid material can be discharged discontinuously (chamber drum, solid walled disc drum), pseudo continuously (self-cleaning disc drum) or continuously (nozzle drum). The drum is the centerpiece of the separator, in which the separation process takes place. There are two types of drums: the chamber drum (known as chamber separators) and the disc drum (known as disc separators). The power transmission on the spindle and thereby on the drum can take place by using one of the three drive motors: helical gears, a belt drive or direct drive, via a special motor. The sealing of the separators is differentiated into four types: open, semi-closed, hydro-hermetic (sealing of the product space) or fully hermetic (absolute airtight).


...
Wikipedia

...