Riveting machines

Riveting machines are used to automatically set (squeeze) rivets in order to join materials together. The riveting machine offers greater consistency, productivity, and lower cost when compared to manual riveting.

Automatic feed riveting machines include a hopper and feed track which automatically delivers and presents the rivet to the setting tools which overcomes the need for the operator to position the rivet. The downward force required to deform the rivet with an automatic riveting machine is created by a motor and flywheel combination, pneumatic cylinder, or hydraulic cylinder. Manual feed riveting machines usually have a mechanical lever to deliver the setting force from a foot or hand lever.

Riveting machines can be sub-divided into two broad groups — impact riveting machines and orbital (or radial) riveting machines.

Impact riveting machines set the rivet by driving the rivet downwards, through the materials to be joined and on into a forming tool (known as a rollset). This action causes the end of the rivet to roll over in the rollset which causes the end of the rivet to flare out and thus join the materials together. Impact riveting machines are very fast and a cycle time of 0.5 seconds is typical.

Orbital riveting machines have a spinning forming tool (known as a peen) which is gradually lowered into the rivet which spreads the material of the rivet into a desired shape depending upon the design of the tool. Orbital forming machines offer the user more control over the riveting cycle but the trade off is in cycle time which can be 2 or 3 seconds.

There are different types of riveting machines. Each type of machine has unique features and benefits. The orbital riveting process is different from impact riveting and spiralform riveting. Orbital riveting requires less downward force than impact or spiral riveting. Also, orbital riveting tooling typically lasts longer.

Orbital riveting machines are used in a wide range of applications including brake linings for commercial vehicles, aircraft, and locomotives, textile and leather goods, metal brackets, window and door furniture, latches and even mobile phones. Many materials can be riveted together using orbital riveting machines including delicate and brittle materials, and sensitive electrical or electronic components.

The orbital riveting process uses a forming tool mounted at a 3 or 6° angle. The forming tool contacts the material and then presses it while rotating until the final form is achieved. The final form often has height and/or diameter specifications.

...
Wikipedia