Radio controlled glider

A radio-controlled glider is a type of radio-controlled aircraft that normally does not have any form of propulsion. They are able to sustain continuous flight by exploiting the lift produced by slopes and thermals, controlled remotely from the ground with a transmitter. They can be constructed from a variety of materials, including wood, plastic, polymer foams, and composites, and can vary in wing loading from very light to relatively heavy, depending on their intended use.

International radio-controlled glider competitions are regulated by the Fédération Aéronautique Internationale (FAI) although many countries have their own national classes.

Hand launching is the simplest way to get a model glider into the air. Depending on craft design and the conditions at launch—the pilot or an assistant need only to gently 'throw' it into the wind, at an angle deemed best suited, usually between horizontal and 45 degrees of zenith. In this manner a successful launch is possible with very little effort. This method is usually utilised when slope soaring, where with a little experience, it is possible to simply hold the craft above the head at the correct angle and let go.

In this method another person runs along the ground pulling a 50-to-150-metre (160 to 490 ft) line with the glider attached to the end, while the pilot steers it. It can be performed on any flat piece of terrain, as the glider is given sufficient altitude during the launch.

A variation of this method uses a pulley with the line staked to the ground and the line passing around it before going to the glider. The tow man runs with the pulley (still running away from the pilot) which doubles his effective speed. A variation of this is used in F3J competition when two tow men run with the pulley to generate much faster launches (although the models have to be sufficiently strong to handle the loads placed upon them by this method) which allows the model to use the energy to "zoom" (the model is pointed downwards briefly to convert the stored energy in the stretched monofilament line into airspeed, and once the airspeed exceeds the towline speed the line is released, before being rotated into a nose high attitude and the speed being converted back into additional height).

...
Wikipedia