*** Welcome to piglix ***

RENFE Class 120

RENFE Class 120 / 121
Alvia 120-861 Madrid-Hendaya.jpg
Manufacturer CAF / Alstom
Constructed 2001 (order date) 12 units
2004 (order date) 45 units
Capacity Class 120 : 237 (+1 reserved)
Class 121 : 280 (+2)
Operator(s) RENFE
Specifications
Car body construction Aluminium
Train length 106.230 m (348 ft 6.3 in)
Car length 27.350 m (89 ft 8.8 in) (end cars)
25.780 m (84 ft 7.0 in) (intermediate cars)
Width 2.920 m (9 ft 7.0 in)
Height 4.100 m (13 ft 5.4 in)
Floor height 1.300 m (51.2 in)
Doors 1 per side per carriage
Maximum speed 250 km/h (160 mph)
Weight 225 tonnes (221 long tons; 248 short tons) empty)
Axle load 15.6 t (15.4 long tons; 17.2 short tons)
Traction system Electrical
Power output 4 MW (5,400 hp) (25 kV AC), 2.7 MW (3,600 hp) (3 kV DC)
Transmission Body mounted motor via cardan shaft to inner axle of each bogie.
Acceleration 0.52 m/s2 (1.7 ft/s2)
Deceleration 0.50 m/s2 (1.6 ft/s2) @ 120 km/h (75 mph)
0.35 m/s2 (1.1 ft/s2) @ 250 km/h (160 mph)
Electric system(s) Catenary
25 kV 50 Hz AC, 3 kV DC
Current collection method Pantograph
UIC classification (1A)'(A1)'-(1A)'(A1)'-(1A)'(A1)'-(1A)'(A1)'
Braking system(s) regenerative/rheostatic and pneumatic disc brakes
Safety system(s) ERTMS N1/2
Multiple working 2 trainsets
Track gauge 1,668 mm (5 ft 5 2132 in)/1,435 mm (4 ft 8 12 in)

The RENFE Class 120 (nickname Sepia) are high-speed electric multiple units used on Alvia services in Spain.

The trainsets are dual-voltage, dual-gauge units capable of changing gauge without stopping at 30 km/h. Twelve units were ordered in 2001, and a further 45 units in 2004

29 units of the class RENFE Class 121 were ordered for medium-distance high-speed Avant services. The units are very similar to the Class 120 but include additional electrical equipment for redundancy (a requirement for trains using the Guadarrama Tunnel), and do not provide first class seating, raising the number of seats to 282.

The trainsets are 4-unit multiple units capable of operating in pairs, designed for medium-distance high-speed services. The inner axle of each carriage bogie is powered by a body mounted three phase asynchronous traction motor via a cardan shaft final drive. The electrical power is regulated by IGBT devices with one converted per carriage. The bogies are of welded steel construction with primary coil springs and secondary air suspension. Tractive forces are transmitted by a drag pivot pin.

The bogies incorporate CAF's BRAVA (Bogie de Rodadura de Ancho Variable Autopropulsado) system which allows gauge-changing without stopping and operating speeds of up to 275 km/h (171 mph) The maximum axleload is 15.6 tonnes (15.4 long tons; 17.2 short tons).

The vehicles are air conditioned with one toilet per car. Passenger services include individual audio systems, and audio and visual information systems. One seat is reserved for disabled passengers, and wheelchair ramps are fitted. The driver's cab is also air conditioned, and the train is equipped with GSM-R systems.

There are 156 seats in 'standard' accommodation and 82 seats in 'first class'.

The 121 class are built to the same design as the original 120 Class but have additional electrical equipment (duplicated for redundancy). Additionally all the seating is in [2+2] formation increasing the capacity to 282.

The first trainset was produced in 2004 and began testing. Services on the Madrid to Barcelona line began in 2006.

The trainsets have operated on the Madrid-Pamplona-Hendaye, Madrid-Logroño, Barcelona-Vigo and Barcelona-Bilbao/Irun lines.

The first trains entered service on the Madrid-Segovia-Valladolid line on 26 January 2009. They are currently used for the Avant services Barcelona-Lleida, A Coruña-Ourense and Zaragoza-Calatayud.

The 6-car TCDD HT65000 electric multiple units ordered from CAF by the Turkish State Railways for the Istanbul-Ankara high-speed line are based upon the Class 120 design.


...
Wikipedia

...