Quadrophonic

Quadraphonic (or Quadrophonic and sometimes Quadrasonic) sound – similar to what is now called 4.0 surround sound – uses four channels in which speakers are positioned at the four corners of the listening space, reproducing signals that are (wholly or in part) independent of one another. Quadraphonic audio was the earliest consumer product in surround sound and thousands of quadraphonic recordings were made during the 1970s.

It was a commercial failure due to many technical problems and format incompatibilities. Quadraphonic audio formats were more expensive to produce than standard two-channel stereo. Playback required additional speakers and specially designed decoders and amplifiers.

Quadraphonic audio reproduction on vinyl records was problematic, because some systems were based on discrete sound channels (allowing for full separation of the four original recorded channels, albeit with restricted high-frequency response and reduced record life), while others were matrix encoded into two tracks that would also play back in standard, two-channel, stereo on normal audio equipment (so-called "compatible" quadraphonic). Also, there were inexpensive "derived" solutions that only provided back ambience channels, not a defined placement of individual instruments.

Quadraphonic systems based on tape were also introduced, based on new equipment capable of playing four discrete channels.

A full, four-channel (Quadraphonic) system will reproduce the Left Front, Left Back, Right Front, and Right Back audio signals in each of four separate speakers. Regardless of discrete or matrix formats, in four-channel stereo the rear speakers should be of the same or almost-same size or quality and have the same or almost-same frequency range as the front speakers.

Discrete reproduction is the only true Quadraphonic system. As its name suggests, with discrete formats the original four audio channels are passed through a four-channel transmission medium and presented to a four-channel reproduction system and fed to four speakers. This is defined as a 4–4–4 system.

With Matrix formats, the four channels are converted (encoded) down to two channels. These are then passed through a two-channel transmission medium (usually an LP record) before being decoded back to four channels and presented to four speakers. To transmit 4 individual audio signals in a stereo-compatible manner, there must be four simultaneous linear equations to reproduce the original 4 audio signals at the output. The term "compatible" indicates that:

...
Wikipedia