Positive end expiratory pressure
Positive end-expiratory pressure (PEEP) is the pressure in the lungs (alveolar pressure) above atmospheric pressure (the pressure outside of the body) that exists at the end of expiration. The two types of PEEP are extrinsic PEEP (PEEP applied by a ventilator) and intrinsic PEEP (PEEP caused by an incomplete exhalation). Pressure that is applied or increased during an inspiration is termed pressure support.
Auto (intrinsic) PEEP — Incomplete expiration prior to the initiation of the next breath causes progressive air trapping (hyperinflation). This accumulation of air increases alveolar pressure at the end of expiration, which is referred to as auto-PEEP.
Auto-PEEP develops commonly in high minute ventilation (hyperventilation), expiratory flow limitation (obstructed airway) and expiratory resistance (narrow airway).
Once auto-PEEP is identified, steps should be taken to stop or reduce the pressure build-up. When auto-PEEP persists despite management of its underlying cause, applied PEEP may be helpful if the patient has an expiratory flow limitation (obstruction).
Applied (extrinsic) PEEP — is usually one of the first ventilator settings chosen when mechanical ventilation is initiated. It is set directly on the ventilator.
A small amount of applied PEEP (4 to 5 cmH2O) is used in most mechanically ventilated patients to mitigate end-expiratory alveolar collapse. A higher level of applied PEEP (>5 cmH2O) is sometimes used to improve hypoxemia or reduce ventilator-associated lung injury in patients with acute lung injury, acute respiratory distress syndrome, or other types of hypoxemic respiratory failure.
Positive end-expiratory pressure can contribute to:
John Scott Inkster an English anaesthetist and physician is credited with discovering PEEP. When his discovery was published in the proceedings of the World Congress of Anaesthesia in 1968, Inkster called it Residual Positive Pressure.
...
Wikipedia