Pollaxe (Polearm)

The pollaxe is a type of European polearm. It was widely used by medieval infantry. It is also known by the names poleaxe, pole-axe, pole axe, polax, and Hache (French meaning axe).

The term has become synonymous with felling or striking down with delivery of a blow.

Weapons such as the halberd, bardiche, and Danish axe are sometimes mistakenly called pollaxes as they are indeed axes mounted on poles, but many etymological authorities consider the poll- prefix historically unrelated to "pole", instead meaning "head".

However, some etymologists, including Eric Partridge, believe that the word is derived from "pole".

The pollaxe design arose from the need to breach the plate armour of men at arms during the 14th and 15th centuries. Generally, the form consisted of a wooden some 1.2–2.0 m (4–6.5 ft) long, mounted with a steel head. It seems most schools of combat suggested a haft length comparable to the height of the wielder, but in some cases hafts appear to have been created up to 2.4 m (8 ft) in length.

The design of the head varied greatly with a variety of interchangeable parts and rivets. Generally, the head bore an axe or hammer upon the damaging 'face', with a spike, hammer, or fluke on the reverse. In addition, there was a projection from the top (often square in cross section) built somewhat like a dagger. The head was attached to the squared-off wooden pole by long flat strips of metal, called langets, which were riveted in place on either two or four of its sides. Also, a round hilt-like disc called a rondelle was placed just below the head. They also appear to have borne one or two rings along the pole's length as places to prevent hands from slipping. Also of note is that the butt end of the staff, opposite the weapon's head, bore a spike.

On quick glance, the pollaxe is often confused with the similar-looking halberd. However, the axe blade on a pollaxe seems to have been consistently smaller than that of a halberd. A smaller head concentrates the kinetic energy of the blow on smaller area, enabling the impact to defeat armour, while broader halberd heads are better against opponents with less armour. Furthermore, many halberds had their heads forged as a single piece, while the pollaxe was typically modular in design.

...
Wikipedia