Platform gap

A platform gap is the space between a train car (or other mass transit vehicle) and the edge of the station platform, often created by geometric constraints, historic legacies, or use of partially compatible equipment.

Many high-quality Bus Rapid Transit (BRT) systems also use high platforms at station stops to allow fast and efficient level boarding and alighting, but potentially leaving hazardous gaps between the platforms and the buses. Alignment setups such as Kassel curbs help to reduce platform gaps without requiring time-consuming manual alignment at each BRT station stop.

The ideal platform would be straight and align perfectly with a train or other large vehicle. Even in this case, a small gap between the conveyances and the platform is necessary to allow the vehicles to move freely without rubbing against the platform edge. In 2007, the Long Island Rail Road regarded an 8-inch (20 cm) platform gap as typical on its non-curved platforms.

In real-world situations, stations are often constrained by limited space, legacy designs, and track geometry or roadway layout. Stations may have to use a compromise design, with a platform curved in a way that will allow a vehicle or train to arrive and depart without mechanical interference, but which leaves unavoidable horizontal and possibly vertical gaps between the cars and the platform edge. These spaces are caused by the geometric gap between a curve (circular arc or otherwise) and the straight-line chord or tangent formed by a railcar or bus in proximity to a platform. These types of gaps are geometrically intrinsic, and cannot be eliminated as long as the platform is located on a curved or banked segment of track or guideway.

When passenger car doors are located only at the ends of each car (a common design for commuter rail and long-distance trains), platform access from a concave platform is preferred, since this brings the car ends in closest proximity to the platform edge. By contrast, a convex platform would leave the largest possible gaps between the car ends and the platform edge, making this design undesirable and thus rarely implemented. An example of platforms designed for access from the concave side is at Yawkey station in Boston, where side platforms for both the inbound and outbound directions are located to reduce platform gaps to commuter rail trains of the Framingham/Worcester Line. Concave and convex gaps also exist in several MTR stations in Hong Kong, particularly on the East Rail Line, which was built on the historic Kowloon-Canton Railway line.

...
Wikipedia