*** Welcome to piglix ***

Pilot 1000

Pilot 1000
Palm Pilot 1000.png
Pilot 1000
Manufacturer Palm Inc (then a subsidiary of U.S. Robotics)
Type Bar PDA
Release date March 1996
Operating system Palm OS 1.0
CPU Motorola 68328 processor at 16 MHz
Memory 128 kB (Pilot 1000) or 512 kB (Pilot 5000) built in
Storage upgradable limit is 12 MB of RAM and 4 MB of ROM
Display 160x160 pixel monochrome touchscreen LCD
Input Graffiti input zone
Camera None
Connectivity Palm Desktop software through RS-232
Power 2x AAA Batteries
Dimensions 120x80x18 mm
Weight 160 g (5.6 oz)
Related articles Palm (PDA)

The Pilot 1000 and Pilot 5000 are early Palm PDAs produced by Palm, Inc. (then a subsidiary of U.S. Robotics). It was introduced in March 1996.

The Pilot uses a Motorola 68328 processor at 16 MHz, and had 128 kB (Pilot 1000) or 512 kB (Pilot 5000) built in Random-access memory.

The PDA has a plastic case (various colors). Its dimensions are 120x80x18 mm and weight is 160 grams. The Pilot has a 160x160 pixel monochrome LCD tactile panel, with a "Graffiti input zone" presented in the bottom third of the screen. Underneath the screen sits a green on/off button, four applications buttons (Date Book, Address Book, To Do List, and Memo Pad) and two scroll buttons. At left, contrast control. At right top, stylus slot. On the back of the device there is a Memory Slot door, Reset button, battery compartment (held two AAA batteries) and Serial Port (for use with the PalmPilot Cradle).

Memory is kept in a "memory slot" under a plastic cover at the back top of the PDA. A 512 kB ROM chip stores the Palm OS 1.0 and resident applications. RAM is available in 128 kB, 512 kB or 1 MB; with a PalmPilot Professional memory card, up to 2 MB of RAM. Hardware limit is 12 MB of RAM and 4 MB of ROM.

After a calibration test presented during the initial power up, the Pilot would boot and be ready for use and synchronization. Connecting and synchronizing the PDA was initially done through a utility called PalmPilot Desktop. For the PC, PalmPilot Desktop was distributed either on 3½ inch disk or on CD-ROM (according to an original floppy disk set, v1.0 was for Windows 95 and included a tutorial disk and two win32s disks for Windows 3.1; v2.0 was for Windows 95 and Windows NT). A version of PalmPilot Desktop (renamed to Palm Desktop) now exists for use with the Mac platform and open source support exists for use on Linux distributions (one of the preferred development platforms for Palm OS), as well.


...
Wikipedia

...