Phased

A phaser is an electronic sound processor used to filter a signal by creating a series of peaks and troughs in the frequency spectrum. The position of the peaks and troughs of the waveform being affected is typically modulated so that they vary over time, creating a sweeping effect. For this purpose, phasers usually include a low-frequency oscillator.

The electronic phasing effect is created by splitting an audio signal into two paths. One path treats the signal with an all-pass filter, which preserves the amplitude of the original signal and alters the phase. The amount of change in phase depends on the frequency. When signals from the two paths are mixed, the frequencies that are out of phase will cancel each other out, creating the phaser's characteristic notches. Changing the mix ratio changes the depth of the notches; the deepest notches occur when the mix ratio is 50%.

The definition of phaser typically excludes such devices where the all-pass section is a delay line; such a device is called a flanger. Using a delay line creates an unlimited series of equally spaced notches and peaks. It is possible to cascade a delay line with another type of all-pass filter. This combines the unlimited number of notches from the flanger with the uneven spacing of the phaser.

Traditional electronic phasers use a series of variable all-pass phase-shift networks which alter the phases of the different frequency components in the signal. These networks pass all frequencies at equal volume, introducing only phase change to the signal. Human ears are not very responsive to phase differences, but this creates audible interferences when mixed back with the dry (unprocessed) signal, creating notches. The simplified structure of a mono phaser is shown below:

The number of all-pass filters (usually called stages) varies with different models, some analog phasers offer 4, 6, 8 or 12 stages. Digital phasers may offer up to 32 or even more. This determines the number of notches/peaks in the sound, affecting the general sound character. A phaser with n stages generally has n/2 notches in the spectrum, so a 4-stage phaser will have two notches.

...
Wikipedia