PL-3

PL-3 or POS-PHY Level 3 is a . It is the name of the interface that the Optical Internetworking Forum's SPI-3 Interoperability Agreement is based on. It was proposed by PMC-Sierra to the Optical Internetworking Forum and adopted in June 2000. The name means Packet Over SONET Physical layer level 3. PL-3 was developed by PMC-Sierra in conjunction with the SATURN Development Group.

The name is an acronym of an acronym of an acronym as the P in PL stands for "POS-PHY" and the S in POS-PHY stands for "SONET" (Synchronous Optical Network). The L in PL stands for "Layer".

There are two broad categories of chip-to-chip interfaces. The first, exemplified by PCI-Express and HyperTransport, supports reads and writes of memory addresses. The second broad category carries user packets over 1 or more channels and is exemplified by the IEEE 802.3 family of Media Independent Interfaces and the Optical Internetworking Forum family of System Packet Interfaces. Of these last two, the family of System Packet Interfaces is optimized to carry user packets from many channels. The family of System Packet Interfaces is the most important packet-oriented, chip-to-chip interface family used between devices in the Packet over SONET and Optical Transport Network, which are the principal protocols used to carry the internet between cities.

It was designed to be used in systems that support OC-48 SONET interfaces . A typical application of PL-3 (SPI-3) is to connect a framer device to a network processor. It has been widely adopted by the high speed networking marketplace.

...
Wikipedia