PDMI
 |
|||
| Designer | CEA | ||
|---|---|---|---|
| Designed | February 2010 | ||
| Length | 22 mm | ||
| Width | 2.5 mm | ||
| Hot pluggable | Yes | ||
| External | Yes | ||
| Audio signal | Analog stereo, digital DisplayPort (1-8 channels, 16 or 24-bit linear PCM; 32 to 192 kHz sampling rate) | ||
| Video signal | Digital 2-lane DisplayPort 1.1, 4.32 Gbit/s data rate | ||
| Pins | 30 pins | ||
| Data signal | USB 3.0 SuperSpeed + 1 Mbit/s for the DisplayPort auxiliary channel | ||
PDMI (Portable Digital Media Interface) is an interconnection standard for portable media players. It has been developed by CEA (Consumer Electronics Association) as ANSI/CEA-2017-A standard Common Interconnection for Portable Media Players in February 2010. Chaired by David McLauchlan from Microsoft, the standard was developed with the input or support of over fifty consumer electronics companies worldwide.
CEA-2017-A is the new revision of the earlier ANSI/CEA-2017 standard adopted in July 2007, which used a proprietary serial protocol based on Media Oriented Systems Transport (MOST) in-vehicle network; the 2007 revision has seen only marginal use in actual devices. New CEA-2017-A devices are not compatible with devices manufactured under the 2007 revision.
PDMI connector is intended to serve as a common interconnection between docking devices and displays and portable/nomadic devices with media playback capability. Intended host devices include docking stations for home A/V equipment, in-car entertainment systems, digital media kiosks, and hotel/in-flight entertainment systems, where PDMI aims to replace the ubiquitous iPod cradle connector.
PDMI uses a 30 pin receptacle with approximate size of 2.5 mm by 22 mm; a cradle-style connector is also defined. The PDMI connector includes the following electrical interfaces:
DisplayPort component provides data rate of 4.32 Gbit/s and supports up to 1080p60 video and 8-channel audio playback on an attached display device, as well as EDID and display control commands. DisplayPort signal can be converted to HDMI format using active converter circuitry in the dock or external signal conversion adapter powered by 3.3 V DisplayPort power.
Power supply from both the host (docking station) and portable device allows for supporting the portable device with power and battery charging, as well as supporting accessories from the portable device.
USB 3.0 "SuperSpeed", USB 2.0, and USB On-The-Go support file transfer and device control, as well as device-to-device intercommunication.
The first mass-production device from a major manufacturer to incorporate PDMI is the Dell Streak, a 5 in (130 mm) tablet device running the Android operating system version 1.6 through 2.2.
...
Wikipedia