Oil production plant

An oil production plant (sometimes called an oil terminal) is a facility which performs processing of production fluids from oil wells in order to separate out key components and prepare them for export. This is distinct from an oil depot, which does not have processing facilities.

Typical production fluids are a mixture of oil, gas and produced water. Many permanent offshore platforms have full oil production facilities on board. Smaller platforms and subsea wells must export raw production fluid to the nearest production facility, which may be on a nearby offshore processing platform or an onshore terminal.

The production plant is said to begin after the production wing valve on the oil well. The product from each well is piped through the choke valve, which regulates the rate of flow. The flowlines are gathered at the inlet manifold and routed into a separator, which will separate the three components. Once the oil has been separated from the gas and produced water, it is usually routed to a coalescer before being metered and pumped to the onshore terminal.

The produced water is often routed to a hydrocyclone to remove entrained oil and solids and then either re-injected into the reservoir or dumped overboard depending on the circumstances and cleanliness of the water. The associated gas is initially dubbed "wet gas" as it is saturated with water and liquid alkanes. The gas is typically routed through scrubbers, compressors and coolers which will remove the bulk of the liquids. This "dry gas" may be exported, re-injected into the reservoir, used for gas lift, flared or used as fuel for the installation's power generators.

...
Wikipedia