*** Welcome to piglix ***

Multicast address


A multicast address is a logical identifier for a group of hosts in a computer network that are available to process datagrams or frames intended to be multicast for a designated network service. Multicast addressing can be used in the link layer (Layer 2 in the OSI model), such as Ethernet multicast, and at the internet layer (Layer 3 for OSI) for Version 4 (IPv4) or Version 6 (IPv6) multicast.

IPv4 multicast addresses are defined by the leading address bits of 1110, originating from the classful network design of the early Internet when this group of addresses was designated as Class D. The Classless Inter-Domain Routing (CIDR) prefix of this group is 224.0.0.0/4. The group includes the addresses from 224.0.0.0 to 239.255.255.255. Address assignments from within this range are specified in RFC 5771, an Internet Engineering Task Force (IETF) Best Current Practice document (BCP 51).

The address range is divided into blocks each assigned a specific purpose or behavior.

Addresses in the range of 224.0.0.0 to 224.0.0.255 are individually assigned by IANA and designated for multicasting on the local subnetwork only. For example, the (RIPv2) uses 224.0.0.9, Open Shortest Path First (OSPF) uses 224.0.0.5 and 224.0.0.6, and Zeroconf mDNS uses 224.0.0.251. Routers must not forward these messages outside the subnet in which they originate.

Addresses in the range 224.0.1.0 to 224.0.1.255 are individually assigned by IANA and designated as the Internetwork Control Block. This block of addresses is used for traffic that must be routed through the public Internet, such as for applications of the Network Time Protocol (224.0.1.1).


...
Wikipedia

...