Metalcasting

In metalworking and jewellery making, casting is a process in which a liquid metal is somehow delivered into a mold (it is usually delivered by a crucible) that contains a hollow shape (i.e., a 3-dimensional negative image) of the intended shape. The metal is poured into the mold through a hollow channel called a sprue. The metal and mold are then cooled, and the metal part (the casting) is extracted. Casting is most often used for making complex shapes that would be difficult or uneconomical to make by other methods.

Casting processes have been known for thousands of years, and have been widely used for sculpture (especially in bronze), jewellery in precious metals, and weapons and tools. Traditional techniques include lost-wax casting (which may be further divided into and vacuum assist direct pour casting), plaster mold casting and sand casting.

The modern casting process is subdivided into two main categories: expendable and non-expendable casting. It is further broken down by the mold material, such as sand or metal, and pouring method, such as gravity, vacuum, or low pressure.

Expendable mold casting is a generic classification that includes sand, plastic, shell, plaster, and investment (lost-wax technique) moldings. This method of mold casting involves the use of temporary, non-reusable molds.

Sand casting is one of the most popular and simplest types of casting, and has been used for centuries. Sand casting allows for smaller batches than permanent mold casting and at a very reasonable cost. Not only does this method allow manufacturers to create products at a low cost, but there are other benefits to sand casting, such as very small-size operations. The process allows for castings small enough fit in the palm of one's hand to those large enough only for train beds (one casting can create the entire bed for one rail car). Sand casting also allows most metals to be cast depending on the type of sand used for the molds.

...
Wikipedia