*** Welcome to piglix ***

Me 163 Komet

Me 163 Komet
Me163efJM.jpg
Me 163 B-1a at the National Museum of Flight in Scotland
Role Interceptor
National origin Germany
Manufacturer Messerschmitt
First flight Me 163A V4 on 1 September 1941
Introduction 1944
Primary user Luftwaffe
Number built ~370
Developed into Messerschmitt Me 263

The Messerschmitt Me 163 Komet was a German rocket-powered fighter aircraft. Designed by Alexander Lippisch, it is the only rocket-powered fighter aircraft ever to have been operational and the first piloted aircraft of any type to exceed 1000 km/h (621 mph) in level flight. Its design was revolutionary and its performance unprecedented. German test pilot Heini Dittmar in early July 1944 reached 1,130 km/h (700 mph), an unofficial flight airspeed record unmatched by turbojet-powered aircraft for almost a decade. Over 300 aircraft were built, but the Komet proved ineffective in its dedicated role as an interceptor aircraft and was responsible for the destruction of only about nine to eighteen Allied aircraft against ten losses. Aside from combat losses many pilots were killed during testing and training.

Work on the design startedunder the aegis of the Deutsche Forschungsanstalt für Segelflug (DFS)—the German Institute for the Study of sailplane flight. Their first design was a conversion of the earlier Lippisch Delta IV known as the DFS 39 and used purely as a glider testbed of the airframe. A larger follow-on version with a small propeller engine started as the DFS 194. This version used wingtip-mounted rudders, which Lippisch felt would cause problems at high speed. Lippisch changed the system of vertical stabilization for the DFS 194's airframe from the earlier DFS 39's wingtip rudders, to a conventional vertical stabilizer at the rear of the aircraft. The design included a number of features from its origins as a glider, notably a skid used for landings, which could be retracted into the aircraft's keel in flight. For takeoff, a pair of wheels, each mounted onto the ends of a specially designed cross-axle, were needed due to the weight of the fuel, but the wheels, forming a takeoff "dolly" under the landing skid, were released shortly after takeoff.


...
Wikipedia

...