Magneto rheological damper

A magnetorheological damper or magnetorheological shock absorber is a damper filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. This allows the damping characteristics of the shock absorber to be continuously controlled by varying the power of the electromagnet. Fluid viscosity increases within the damper as electromagnet intensity increases. This type of shock absorber has several applications, most notably in semi-active vehicle suspensions which may adapt to road conditions, as they are monitored through sensors in the vehicle, and in prosthetic limbs.

Many applications have been proposed using magnetorheological (MR) dampers, while only few have been commercialized. While vehicle applications are the most common use of MR dampers, useful medical applications have risen as well, including implants and rehabilitation methods. Since MR dampers and not yet perfect, they are limited in terms of application. Disadvantages do exist when using a large scale MR damper, for example, particle settling within the carrier fluid may occur that inhibits some possible application.

The technology was originally developed by General Motors Delphi Automotive Division based in the USA and then developed further by BeijingWest Industries in China after BeijingWest Industries bought the technology from General Motors. BeijingWest Industries has subsequently introduced improvements including a redesigned ECU and the introduction of a dual coil system.

These types of systems are available from OEMs for several vehicles, including the Acura MDX, Audi TT and R8, Buick Lucerne, Cadillac ATS, CTS-V, DTS, XLR, SRX, STS, Chevrolet Corvette, Camaro ZL1, Ferrari 458 Italia, 599GTB, F12 Berlinetta, Shelby GT350, Holden HSV E-Series and Lamborghini Huracán. These systems were produced by the Delphi Corporation and now by BWI Group under the proprietary name MagneRide.

...
Wikipedia