Magdeburg hemispheres

The Magdeburg hemispheres are a pair of large copper hemispheres, with mating rims. They were used to demonstrate the power of atmospheric pressure. When the rims were sealed with grease and the air was pumped out, the sphere contained a vacuum and could not be pulled apart by teams of horses. The Magdeburg hemispheres were designed by a German scientist and mayor of Magdeburg,Otto von Guericke, to demonstrate the air pump that he had invented, and the concept of atmospheric pressure. The first artificial vacuum had been produced a few years earlier by Evangelista Torricelli, and had inspired Guericke to design the world's first vacuum pump, which consisted of a piston and cylinder with one-way flap valves. The hemispheres became popular in physics lectures as an illustration of the strength of air pressure, and are still used in education. A pair of the original hemispheres are preserved in the Deutsches Museum in Munich.

The Magdeburg hemispheres, around 50 cm (20 inches) in diameter, were designed to demonstrate the vacuum pump that Guericke had invented. One of them had a tube connection to attach the pump, with a valve to close it off. When the air was sucked out from inside the hemispheres, and the valve was closed, the hose from the pump could be detached, and they were held firmly together by the air pressure of the surrounding atmosphere.

The force holding the hemispheres together was equal to the area bounded by the joint between the hemispheres, a circle with a diameter of 50 cm, multiplied by the difference in air pressure between the inside and the outside. It is unclear how strong a vacuum Guericke's pump was able to achieve, but if it was able to evacuate all of the air from the inside, the hemispheres would have been held together with a force of around 20 000 N (4400 lbf, or 2.2 short tons), equivalent to lifting a car or small elephant; a dramatic demonstration of the pressure of the atmosphere.

...
Wikipedia