*** Welcome to piglix ***

MUD


Mud is a mixture of water and any combination of different kinds of soil (loam, silt, and clay), and it usually forms after rainfall or near water sources. Ancient mud deposits harden over geological time to form sedimentary rock such as shale or mudstone (generally called lutites). When geological deposits of mud are formed in estuaries the resultant layers are termed bay muds.

In the construction industry, mud is a semi-fluid material that can be used to coat, seal, or adhere materials. Depending on the composition of the mud, it can be referred by many different names, including slurry, mortar, plaster, stucco, and concrete.

Mud, cob, adobe, clay, and many other names are historically used synonymously to mean a mixture of subsoil and water possibly with the addition of stones, gravel, straw, lime, and/or bitumen. This material was used a variety of ways to build walls, roofs and floors.

Mud can be made into mud bricks, also called adobe, by mixing mud with water, placing the mixture into moulds and then allowing it to dry in open air. Straw is sometimes used as a binder within the bricks, as it adds a support lattice. When the brick would otherwise break, the straw will redistribute the force throughout the brick, decreasing the chance of breakage. Such buildings must be protected from groundwater, usually by building upon a masonry, fired brick, rock or rubble foundation, and also from wind-driven rain in damp climates, usually by deep roof overhangs. In extremely dry climates a well drained flat roof may be protected with a well-prepared (puddled) and properly maintained dried mud coating, viable as the mud will expand when moistened and so become more water resistant. Adobe mudbricks were commonly used by the Pueblo Indians to build their homes and other necessary structures.


...
Wikipedia

...