*** Welcome to piglix ***

Low melting point metal


A fusible alloy is a metal alloy capable of being easily fused, i.e. easily meltable, at relatively low temperatures. Fusible alloys are commonly, but not necessarily, eutectic alloys.

Sometimes the term "fusible alloy" is used to describe alloys with a melting point below 183 °C (361 °F; 456 K). Fusible alloys in this sense are used for solder.

From practical view, low melting alloys can be divided up into:

Some reasonably well known fusible alloys are Wood's metal, Field's metal, Rose metal, Galinstan, and NaK.

Melted fusible alloys can be used as coolants as they are stable under heating and can give much higher thermal conductivity than most other coolants; particularly with alloys made with a high thermal conductivity metal such as indium or sodium. Metals with low neutron cross-section are used for cooling nuclear reactors.

Such alloys are used for making the fusible plugs inserted in the furnace crowns of steam boilers, as a safeguard in the event of the water level being allowed to fall too low. When this happens the plug, being no longer covered with water, is heated to such a temperature that it melts and allows the contents of the boiler to escape into the furnace. In automatic fire sprinklers the orifices of each sprinkler is closed with a plug that is held in place by fusible metal, which melts and liberates the water when, owing to an outbreak of fire in the room, the temperature rises above a predetermined limit.

(see also solder alloys)


...
Wikipedia

...