Lotus Eclat | |
---|---|
Overview | |
Manufacturer | Lotus Cars |
Also called | Lotus Sprint (USA) |
Production | 1975–1982 |
Body and chassis | |
Class | Sports car |
Body style | 2-door coupe |
Layout | Front-engine, rear-wheel-drive |
Powertrain | |
Engine | 2.0L Lotus 907 Slant Four or 2.2L Lotus 912 Slant Four |
Transmission | 4 or 5-speed manual automatic |
Dimensions | |
Wheelbase | 2,438 mm (96.0 in) |
Length | 4,458 mm (175.5 in) |
Width | 1,816 mm (71.5 in) |
Height | 1,194 mm (47.0 in) |
Curb weight | 1,055 kg (2,326 lb) |
Chronology | |
Successor | Lotus Excel |
Lotus Eclat (Type 76 and Type 84) is a front engine rear drive coupe automobile built from 1975 to 1982 by Lotus Cars. It was based on the Lotus Elite but had a fastback body style which offered more practicality with storage in the boot (trunk), albeit with less headroom above the rear seats. The car was initially to be called the "Elite Coupe".
The Eclat Series 1 (1975–1980) was announced in October 1975. It used a 1973 cc 160 hp (120 kW) Lotus 907 Slant Four engine. Later cars (1980–1982) used a larger 2174 cc Lotus 912 engine, however, because of emission regulations modifications it still only produced 160 hp (120 kW). It did, however, produce more torque and thus improved the car's performance. Both were versions of the Lotus 900 series engine series, which was also used in naturally aspirated and turbo charged versions in the Lotus Esprit.
Early cars either had a four speed Ford gearbox or the five speed gearbox derived by Lotus from Austin Maxi components. Later cars used a Getrag five speed gearbox. Some cars were fitted with three speed automatic gearboxes. The Eclat had disc brakes at the front, and inboard drum brakes at the rear. Air conditioning and power steering were offered as options. In the final model year, a "Riviera" option was offered with a lift out roof panel.
Approximately 1,500 examples of the Eclat were produced.
The original mild steel chassis fitted by Lotus supported was accompanied by a strip of felt which fitted between body and the steel crossmember of the chassis. In damp climates, the felt became a water trap and caused structural corrosion, resulting in a crumbling rear chassis. Chassis replacement was initially not cost effective on the Eclat and Elite, and in consequence resale values suffered hugely. Series 2 cars were fitted with a galvanised chassis as standard and a large number of series 1 vehicles have had replacements fitted, which are usually galvanised.
The car was well received by the motoring press, which praised the car's handling and grip. The fuel consumption was also considered reasonable at the time, in comparison with the larger and multi cylinder engines used in competitor GT cars.