*** Welcome to piglix ***

List of Dell PowerEdge Servers


Dell PowerEdge is a server line by Dell, following the naming convention for other Dell products: the PowerVault (data storage) and the PowerConnect (data transfer & switches).

Below is an overview of current and former servers within Dell's PowerEdge product line. Different models are or were available as towers, 19-inch racks or blades. In the current naming scheme, towers are designated by T, racks by R, and blades by M (for modular). The 19" rack-servers come in different physical heights expressed in rack unit or U. Most modern servers are either 1U or 2U high while in the past the 4U was more common.

Over the years, many different types of PowerEdge servers have been introduced and there was wide variety of product and family codes used within the PowerEdge name.

The Dell Itanium-based servers were introduced before this new naming-convention was introduced and were only available as rack servers.

Since the introduction of the Generation 10 servers in 2007 Dell has adopted a standardized method for naming their servers; the name of each server is now represented by a letter followed by 3 digits. The letter indicates the type of server: R (for Rack-mountable) indicates a 19" rack-mountable server, M (for Modular) indicates a blade server, whilst T (for Tower) indicates a stand-alone server.

This letter is then followed by 3 digits.

For example: The Dell PowerEdge M610 is a two-socket server of the 11th generation using an Intel CPU whilst the R605 is a two-socket AMD-based rack-server of the 10th generation.

Since Generation 10 there are models for the M1000e enclosure. The blade-servers in Generation 8 and Generation 9 are using another enclosure that is not compatible with the current M1000e system. In form-factor there are two models: half-height and full-height. In an enclosure you can fit 8 full or 16 half-height blades (or a mix). Each server has two or four on-board NIC's and two additional Mezzanine card-slots for additional I/O options: 1 Gb or 10 Gb Ethernet cards, Fibre Channel HBA's or InfiniBand slots. Apart from USB connectors a blade-server doesn't offer direct connections: all I/O goes via the midplane of the enclosure.


...
Wikipedia

...