James & Frederick Howard

James & Fred Howard of Bedford, later known simply as Howards, were one of the smaller English makers of agricultural machinery and steam traction engines. At The Great Exhibition of 1851 they exhibited a range of horse-drawn implements. After World War I, Howards became part of AGE, Agricultural & General Engineers, along with many of the other British makers of similar machinery.

Howard traction engines are recognisable by their distinctive placement of their steam engine behind the boiler, rather than on top as for the far more common overtype. This gives them an unusually long and low appearance, with the flywheel set particularly low. This also requires the provision of a steam dome atop the boiler, an unusual arrangement for an English engine. Although usually plain in appearance and painted black, with little ornamentation compared to the later Edwardian engines, Howards carried very large brass nameplates on their boiler sides and smokebox door reading "James & Fred^k Howard. Bedford. England".

They also built ploughing engines. Unlike the better-known Fowlers, the Howard used a pair of winding drums. This allowed a single engine and an anchored return pulley to plough, rather than the Fowler system that used a pair of engines, each one pulling alternately. The two drums were too large to fit in the usual position beneath the boiler and so were moved to a horizontal axle behind the engine's scuttle, with a pair of sheaves beneath the boiler to guide the cables.

Survivors are rare:

...
Wikipedia