Island class cutters
USCGC Knight Island (WPB-1348) commissioned in 1992, the second newest Island-class 110
|
|
| Class overview | |
|---|---|
| Name: | Island class |
| Builders: | Bollinger Shipyards, Lockport, Louisiana |
| Operators: | United States Coast Guard, Coast Guard of Georgia,Sea Shepherd Conservation Society |
| Built: | 1985-1992 |
| In service: | 1985-today |
| Completed: | 49 |
| Active: | 37 |
| General characteristics | |
| Displacement: | 168 tons |
| Length: | 110 ft (34 m) |
| Beam: | 21 ft (6.4 m) |
| Draft: | 6.5 ft (2.0 m) |
| Propulsion: | 2 Paxman Valenta or Caterpillar diesels |
| Speed: | 29.5 knots |
| Range: | 3,300 miles |
| Endurance: | 5 days |
| Boats & landing craft carried: |
1 - Cutter Boat Medium (Yamaha 90 HP outboard engine) |
| Complement: | 16 (2 officers, 14 enlisted) |
| Sensors and processing systems: |
AN/SPS-73 radar |
| Armament: | |
| Aircraft carried: | None |
The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 37 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.
The 110 ft (34 m) Island-class patrol boats are a U.S. Coast Guard modification of a highly successful British-designed patrol boat. With excellent range and seakeeping capabilities, the Island class, all named after U.S. islands, replaced the older 95 ft (29 m) Cape-class cutters. These cutters are equipped with advanced electronics and navigation equipment and are used in support of the Coast Guard's maritime homeland security, migrant interdiction, drug interdiction, defense operations, fisheries Enforcement, and search and rescue missions. The 58 ordered Sentinel-class cutters, selected under the Fast Response Cutter (FRC) program, are slated to replace the Island class. Six Island class cutters are currently stationed in Manama, Bahrain as a part of Patrol Forces Southwest Asia to provide the Navy's Fifth Fleet with combat ready assets.
As built, these vessels were all 110 feet (34 m) in length. In 2002 as part of the Integrated Deepwater System Program, the Coast Guard began refitting some of these vessels, adding 13 feet (4.0 m) to the stern to make room for a high-speed stern launching ramp, and replacing the superstructure so that these vessels had enough room to accommodate mixed gender crews. The refit added about 15 tons to the vessel's displacement, and reduced its maximum speed by approximately one knot. The eight cutters being modified were the USCGC Matagorda (WPB-1303), USCGC Attu (WPB-1317), USCGC Metompkin (WPB-1325), USCGC Padre (WPB-1328), USCGC Manitou (WPB-1302), USCGC Monhegan (WPB-1305), USCGC Nunivak (WPB-1306) and the USCGC Vashon (WPB-1308).
...
Wikipedia