Hope Mills Dam

Hope Mills Dam
Hope Mills Dam and drained lake, June 2010
Location of Hope Mills Dam in USA North Carolina
Location	Hope Mills, Cumberland County, North Carolina
Coordinates	34°58′20″N 78°56′42″W / 34.97222°N 78.94500°W / 34.97222; -78.94500Coordinates: 34°58′20″N 78°56′42″W / 34.97222°N 78.94500°W / 34.97222; -78.94500
Status	Failed
Construction began	2007
Opening date	2008
Construction cost	$9.8 million
Owner(s)	Town of Hope Mills
Dam and spillways
Type of dam	Concrete gravity
Impounds	Little Rockfish Creek
Height	33 ft (10 m)
Length	750 ft (230 m)
Spillway type	Chute, labyrinth
Spillway capacity	10,240 cu ft/s (290 m3/s)
Reservoir
Creates	Hope Mills Lake
Total capacity	816 acre·ft (1,007,000 m3)
Catchment area	94.4 sq mi (244 km2)
Surface area	88 acres (0.36 km2)

The Hope Mills Dam, also known as Hope Mills Dam #1, is a failed concrete gravity dam on Little Rockfish Creek in Hope Mills, North Carolina, USA, which created Hope Mills Lake. Three different dams were built on the site including the current one. The first dam, of rock-crib design, was built in 1839 to power local cotton mills. The second was an embankment dam built in 1924 for powering the mills and later to maintain the lake's water level. Both previous dams failed from flooding. The current dam failed in June 2010 after a leak was discovered and the lake was drained.

The first Hope Mills Dam was a rock-crib dam and was built in 1839 by the Rockfish Mills Co. for the powering of four cotton mills nearby. In 1865, General Sherman and Union Army troops burned the cotton mills but spared the dam from destruction. After the American Civil War, two mills were rebuilt and the surrounding area including the dam was named Hope Mills. On May 9, 1923 this first dam was breached by a flood and construction on an earthen-embankment dam began the same year. Rockfish Mills Co. again constructed the dam with designs from Mees Consulting Engineers of Charlotte and the actual construction by the Scott-Stewart Jones Co. The second dam cost $27,093 and was completed in early 1924.

In 1930, Rockfish Mills Co. went bankrupt and was not bought until 1941 by Dixie Yarns. Dixie Yarns eventually gave the dam to the town in 1984. In 1993, a two-lane Lakeview Road bridge was installed over the dam and at the same time a leak in the dam was repaired. In 1994, an unused turbine shaft from the old cotton mill site was uncovered and filled with cement. In addition, walls behind the dam's spillway were reinforced with rock after concerns were voiced about their strength. Hurricane Floyd brought heavy rains in 1999 which, after concerns of a dam breach, forced the opening of the floodgates. In 2001, a 6-foot (1.8 m) crack was repaired that engineers had determined was not structural. Later in 2001, the dam passed safety inspection but two small holes and some eroded concrete was repaired in 2002.

In late May 2003, over Memorial Day weekend, heavy rains caused the embankment dam to give way and also destroyed 30 feet (9.1 m) of the nearby Lakeview Road. About 40 homes and 1600 people downstream were evacuated as water from Hope Mills Lake rushed down the creek causing $2.1 million in damages before making its way to the Cape Fear River. One of the floodgates on the dam had failed to open because of the pressure exerted by the flood waters, which helped push water over the top of the dam. Later in 2003, Lakeview Road was repaired and plans for the repair of the dam were underway. After four years of fund and permit requests, construction on the new 14 million dollar Hope Mills Dam began in March 2007.Crowder Construction Company was awarded the contract to construct the dam along with designs from Mactec, Morrison Engineers. The new dam would essentially be a concrete labyrinth-spillway that would expand the dam's ability to discharge flood waters. The new dam would be 600 feet (180 m) longer and would incorporate a fish ladder as well. Construction of the new Hope Mills Dam was complete in June 2008 and the lake was again full by August.