Hinkley Point A nuclear power station
| Hinkley Point A nuclear power station | |
|---|---|
Hinkley Point A twin buildings housing the Magnox reactors
|
|
 Location of Hinkley Point A nuclear power station in Somerset
|
|
| Country | England |
| Location | Hinkley Point, Somerset, South West England |
| Coordinates | 51°12′31″N 3°08′01″W / 51.208739°N 3.133743°WCoordinates: 51°12′31″N 3°08′01″W / 51.208739°N 3.133743°W |
| Status | Decommissioned |
| Construction began | 1957 |
| Commission date | 1965 |
| Decommission date | 2000 |
| Owner(s) |
Central Electricity Generating Board (1965–1989) Nuclear Electric (1989–1996) Magnox Electric (1996-2005) Nuclear Decommissioning Authority (2005-Present) |
| Operator(s) | Magnox Limited |
| Nuclear power station | |
| Reactor type | Magnox GCR |
| Reactor supplier | English Electric & Babcock & Wilcox Ltd |
| Fuel type | Magnox |
| Fuel supplier | British Nuclear Fuels Limited |
| Cooling source | Sea water Severn Estuary |
| Power generation | |
| Make and model | English Electric |
| Units decommissioned | 2 x 267 MWe |
| Thermal capacity | 2 x 900 MWt |
| Nameplate capacity | 534 MW |
| 1994 output | 3,261 GW·h |
|
Website www |
|
| grid reference ST211460 | |
Hinkley Point A nuclear power station is a decommissioned Magnox Nuclear power station located on a 19.4-hectare (48-acre) site in Somerset on the Bristol Channel coast, 5 miles (8 km) west of the River Parrett estuary.
Hinkley Point A was one of three Magnox power stations located close to the mouth of the River Severn and the Bristol Channel, the others being Oldbury, and Berkeley.
The construction of the power station, which was undertaken by a consortium backed by English Electric, Babcock & Wilcox Ltd and Taylor Woodrow Construction, began in 1957. The reactors and the turbines were supplied by English Electric.
The power station, which is currently being decommissioned, had two Magnox reactors, each supplying steam to three English Electric 93.5 MWe turbine generator sets which were all together across both reactors designed to produce 500 MWe net but, after de-rating of the reactor power output due to corrosion concerns, both reactors combined produced 470 MWe net.
The design followed the principles established by the Calder Hall nuclear power station, in that it used a reactor core of natural uranium fuel in Magnox alloy cans within a graphite moderator, all contained in a welded steel pressure vessel. The core was cooled by CO2 pumped by six nominal 7,000 hp (5.2 MW) gas circulators, which transported the hot gas from the core to the six Steam Raising Units (boilers) via steel ducts. The gas circulators could be driven by induction motors supplied with mains electricity or, when steam was available, dedicated variable speed turbo alternator sets. The design pressure of the gas circuit was 185 psig, and the temperature of the gas leaving the reactor was 378 °C, although this was later reduced when the hot CO2 was found to be corroding the mild steel components of the gas circuit more quickly than had been anticipated. Like all Magnox reactors, Hinkley Point A was designed for on-load refuelling so that exhausted fuel elements could be replaced with fresh without shutting down the reactor.
...
Wikipedia