*** Welcome to piglix ***

Harpsichord


A harpsichord is a musical instrument played by means of a keyboard. It produces sound by plucking a string when a key is pressed.

"Harpsichord" designates the whole family of similar plucked keyboard instruments, including the smaller virginals, muselar, and spinet.

The harpsichord was widely used in Renaissance and Baroque music. During the late 18th century, it gradually disappeared from the musical scene with the rise of the piano. In the 20th century, it made a resurgence, being used in historically informed performances of older music, in compositions, and in popular culture.

Harpsichords vary in size and shape, but all have the same basic functional arrangement. The player depresses a key that rocks over a pivot in the middle of its length. The other end of the key lifts a jack (a long strip of wood) that holds a small plectrum (a wedge-shaped piece of quill, nowadays often plastic), which plucks the string. When the player releases the key, the far end returns to its rest position, and the jack falls back. The plectrum, mounted on a tongue that can swivel backwards away from the string, passes the string without plucking it again. As the key reaches its rest position, a felt damper atop the jack stops the string's vibrations. These basic principles are explained in detail below.

Each string is wound around a tuning pin, normally at the end of the string closer to the player. When rotated with a wrench or tuning hammer, the tuning pin adjusts the tension so that the string sounds the correct pitch. Tuning pins are held tightly in holes drilled in the pinblock or wrestplank, an oblong hardwood plank.

Proceeding from the tuning pin, a string next passes over the nut, a sharp edge that is made of hardwood and is normally attached to the wrestplank. The section of the string beyond the nut forms its vibrating length, which is plucked and creates sound.

At the other end of its vibrating length, the string passes over the bridge, another sharp edge made of hardwood. As with the nut, the horizontal position of the string along the bridge is determined by a vertical metal pin inserted into the bridge, against which the string rests.


...
Wikipedia

...