Hamworthy Freight Branch
| Hamworthy Freight Branch | |
|---|---|
Looking east at Hamworthy Park level crossing on the Hamworthy Freight Branch in Poole, Dorset.
|
|
| Overview | |
| Locale | Dorset |
| Technical | |
| Line length | 2.16 miles (3.48 km) |
| Track gauge | 4 ft 8 1⁄2 in (1,435 mm) |
 Hamworthy branch photo gallery
|
|
|
The line at Hamworthy Station
|
|
|
BR Class 02 on the line (2)
|
|
|
The line near the Sunseeker factory
|
The Hamworthy Freight Branch is a short standard gauge line from Hamworthy Station to the Hamworthy side of Poole Harbour.
The line was originally constructed by the Southampton and Dorchester Railway in 1847 and was the terminus for Poole via a bridge over the inlet dividing Poole and Hamworthy. A new through branch opened to Poole 1872 which meant that passengers had a direct service and the Hamworthy Branch lost its passenger status in 1896.
The line was once worked, as part of the local pick up goods rounds, by a Southern Railway B4 class 0-4-0 steam locomotive.
During the late 1960s and early 1970s the line was worked by Class 03 Drewry 0-6-0 diesel shunting locomotives numbers 03 179 and 03 083, occasionally as double headers (cab to cab) when hauling a long train of Ford transit vans on bogie flat wagons or heavy girder and sheet steel rolls on bogie bolsters. Local school children at the lineside Hamworthy Middle School were quite familiar with these locomotives and could tell from a distance which was which as 03 179 was always front towards the docks and 03 083 was always cab towards the docks.
The brake vans used were the standard BR type, occasionally carrying a bicycle on the rear platform, as the train would stop at the hand opened level crossing gates in Ashmore Avenue, a man would jump down from the locomotive, open the gates and the train would proceed through. The train would stop just clear of the gates and the bicycle would be unloaded for the man to cycle back to Poole station once he had closed the gates. On occasions the reverse would happen and the man would cycle from Poole station, open the gates, the train would pass through returning to Poole, stop and pick up the man plus bicycle on the brake van.
A frequent brake van visitor was the ex-LSWR bogie brake van, which still had faint LSWR lettering showing under the BR red oxide wood paint. This tended to be used on heavier steel trains hauled by the double headed 03 shunters.
...
Wikipedia