*** Welcome to piglix ***

HMCS Chambly (K116)

HMCS Chambly in as-built condition, circa 1941.
HMCS Chambly in as-built condition, circa 1941. Note that the ship is still fitted with minesweeping gear, and that no armament has yet been installed in the "bandstand" aft of the engine room.
History
Canada
Name: Chambly
Namesake: Chambly, Quebec
Ordered: 20 January 1940
Builder: Canadian Vickers Ltd., Montreal, Quebec
Laid down: 20 February 1940
Launched: 29 July 1940
Commissioned: 18 December 1940
Decommissioned: 20 June 1945
Identification: pennant number: K116
Honours and
awards:
Atlantic 1941-45
Fate: sold for civilian use as Sonia Vinke in 1952 and scrapped in 1966.
General characteristics
Class and type: Flower-class corvette (original)
Displacement: 925 long tons (940 t; 1,036 short tons)
Length: 205 ft (62.48 m)o/a
Beam: 33 ft (10.06 m)
Draught: 11.5 ft (3.51 m)
Propulsion:
  • single shaft
  • 2 × fire tube Scotch boilers
  • 1 × 4-cycle triple-expansion reciprocating steam engine
  • 2,750 ihp (2,050 kW)
Speed: 16 knots (29.6 km/h)
Range: 3,500 nautical miles (6,482 km) at 12 knots (22.2 km/h)
Complement: 85
Sensors and
processing systems:
  • 1 × SW1C or 2C radar
  • 1 × Type 123A or Type 127DV sonar
Armament:

HMCS Chambly was a Flower-class corvette serving in the Royal Canadian Navy. She was ordered from Canadian Vickers Ltd. in Montreal, laid down on 20 February 1940, launched on 29 July, and commissioned on 18 December 1940, named after the city of Chambly, Quebec. Chambly escorted trade convoys between Halifax Harbour and the Western Approaches through the battle of the Atlantic and, together with HMCS Moose Jaw, achieved the RCN's first U-boat kill of the war.

Flower-class corvettes like Chambly serving with the Royal Canadian Navy during the Second World War were different from earlier and more traditional sail-driven corvettes. The "corvette" designation was created by the French as a class of small warships; the Royal Navy borrowed the term for a period but discontinued its use in 1877. During the hurried preparations for war in the late 1930s, Winston Churchill reactivated the corvette class, needing a name for smaller ships used in an escort capacity, in this case based on a whaling ship design. The generic name "flower" was used to designate the class of these ships, which – in the Royal Navy – were named after flowering plants.

Corvettes commissioned by the Royal Canadian Navy during the Second World War were named after communities for the most part, to better represent the people who took part in building them. This idea was put forth by Admiral Percy W. Nelles. Sponsors were commonly associated with the community for which the ship was named. Royal Navy corvettes were designed as open sea escorts, while Canadian corvettes were developed for coastal auxiliary roles which was exemplified by their minesweeping gear. Eventually the Canadian corvettes would be modified to allow them to perform better on the open seas.


...
Wikipedia

...