*** Welcome to piglix ***

Gulftown

Gulftown
Produced 1H 2010
Designed by Intel Corporation
Max. CPU clock rate 3.2 GHz to 3.46 GHz
Min. feature size 32 nanometer
Instruction set x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES-NI
Microarchitecture Westmere
CPUID code 0206Cx
Product code 80613, 80614
Cores 6 (physical), 12 (logical)
L2 cache 6 × 256 KB
L3 cache 12 MB
Application UP/DP Server, Workstation, Gaming
Package(s)
  • LGA-1366
Brand name(s)
  • Core i7-970, 980, 980X, 990X
  • Xeon 3600s, 5600s

Gulftown or Westmere-EP is the codename of an up to six-core hyperthreaded Intel processor able to run up to 12 threads in parallel. It is based on Westmere microarchitecture, the 32 nm shrink of Nehalem. Originally rumored to be called the Intel Core i9, it is sold as an Intel Core i7. The first release was the Core i7 980X in the first quarter of 2010, along with its server counterpart, the Xeon 3600 and the dual-socket Xeon 5600 (Westmere-EP) series using identical chips.

First figures indicate that at equivalent clock rates, depending on the software, it has up to 50% higher performance than the identically clocked quad-core Bloomfield Core i7-975. However, consumer software that utilizes six real cores is still quite rare as of 2011, and not every multithreaded program is able to take advantage of this many cores. Despite having 50% more transistors, the CPU strongly benefits from the 32-nm process, drawing the same or even less power (depending on the operating system) than its Bloomfield predecessors with merely four cores. The thermal design power (TDP) of all planned models is stated to be 130 watts.

Westmere-EP is the first six-core dual-socket processor from Intel, following the quad-core Bloomfield and Gainestown (a.k.a. Nehalem-EP) processors using the same LGA 1366 package, while the earlier Dunnington six-core processor is a Socket 604 based multi-socket processor. The CPUID extended model number is 44 (2Ch) and two product codes are used, 80613 for the UP desktop/server models and 80614 for the Xeon 5600-series DP server models. In some models, only four of the six cores are enabled.

As of 2015, Xeon 3600 and 5600 series Westmere-EP processors have become somewhat sought after as an upgrade route for older X58 motherboards. In many cases, proper BIOS support has allowed users to fit these 6-core processors onto boards originally designed for 2 or 4-core processors. In fully threaded workloads, total system performance will increase by a value equal to the number of cores added (i.e. moving from a 4-core 2.6 GHz to a 6-core 2.6 GHz system would enable 50% more total processing power). With proper BIOS support and the correct supporting components, many users have reported substantial overclocking potential, often as high as 4.4 GHz while staying within Intel's maximum allowed voltages (no higher than 1.35v for the core or the uncore). For gaming, such a system is proving remarkably competitive against much newer, and usually more expensive processors; the supply of second-hand chips from decommissioned servers is finite, however.


...
Wikipedia

...