GER Class C32

GER Class C32
LNER Class F3

GER 1085, one of the condenser-fitted R33 batch in an undated photograph

Type and origin Power type Steam Designer James Holden Builder Stratford Works Build date 1893–1902 Total produced 50

Specifications Configuration 2-4-2T UIC class 1B1 n2t Gauge 4 ft 8 1⁄2 in (1,435 mm) Leading dia. 4 ft 0 in (1.219 m) Driver dia. 5 ft 8 in (1.727 m) Trailing dia. 4 ft 0 in (1.219 m) Length 34 ft 10 in (10.62 m) over buffers Axle load 15.30 long tons (15.55 t) Adhesive weight 29.25 long tons (29.72 t) Loco weight 58.60 long tons (59.54 t) Fuel capacity 3.25 long tons (3.30 t) Water cap 1,460 imp gal (6,600 l; 1,750 US gal) Firebox:  • Firegrate area 18.0 sq ft (1.67 m2) Boiler pressure 160 lbf/in2 (1.10 MPa) Heating surface 1,164.7 sq ft (108.20 m2)  • Tubes 1,063.8 sq ft (98.83 m2)  • Firebox 100.9 sq ft (9.37 m2) Cylinders Two, inside Cylinder size 17 1⁄2 in × 24 in (444 mm × 610 mm) Valve gear Stephenson Valve type Slide valves Loco brake Westinghouse air Train brakes Westinghouse air

Performance figures Tractive effort 14,700 lbf (65.39 kN)

Career Operators Great Eastern Railway → London and North Eastern Railway → British Railways Class GER: 32 LNER: F3 Power class BR: 1P Axle load class LNER: Route availability 3 Withdrawn 1936–1953 Disposition All scrapped

The GER Class C32 was a class of fifty 2-4-2T steam locomotives designed by James Holden and built by the company's Stratford Works between 1892 and 1902. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F3.

These locomotives were fitted with 17 ¹⁄₂-by-24-inch (444 mm × 610 mm) cylinders and 5-foot-8-inch (1.727 m) diameter driving wheels. They were a tender version of the T26 class 2-4-0s, albeit with a 3-inch (76 mm) shorter coupled wheelbase. They shared the same type of boiler as that class, well as the N31 and later Y14 class 0-6-0s. They were intended for use on long-distance stopping services, and so they were all initially fitted with Westinghouse air brake equipment.

The R33 and D53 batches had been fitted with condensing equipment from new, but the LNER gradually removed them from all but one locomotive, the exception being an early retirement.

All had survived to pass to the LNER in 1923; the first retirement started in 1936 when 8090 was withdrawn.

Thirty-seven locomotives lasted long enough to be renumbered in the 1946 scheme; fifteen of them became the property of British Railways in 1948, but only three of them lasted long enough to receive their BR number.