*** Welcome to piglix ***

Forksville Covered Bridge

Forksville Covered Bridge
National Register of Historic Places
A red, wooden covered bridge over a rocky stream with a forest-covered mountain in the background
The Forksville Covered Bridge over Loyalsock Creek, as seen from the south
Official name: Forksville Covered Bridge
Named for: Forksville
Country United States
State Pennsylvania
County Sullivan
Borough Forksville
Road State Route 4012 (single lane)
Crosses Loyalsock Creek
Elevation 1,010 ft (308 m)
Coordinates 41°29′18″N 76°36′00″W / 41.48833°N 76.60000°W / 41.48833; -76.60000Coordinates: 41°29′18″N 76°36′00″W / 41.48833°N 76.60000°W / 41.48833; -76.60000 
Length 152.9 ft (47 m)
Width 15.0 ft (4.6 m)
Clearance 8.0 ft (2.4 m)
Builder Sadler Rogers (or Rodgers)
Design Burr arch truss bridge
Material Wood
Built 1850
 - Restored 1970, 2004
Owned and maintained by Pennsylvania, PennDOT
NBI Number 564012001000500
WGCB Number 38-57-01
Load tons (2.7 t)
Added to NRHP July 24, 1980
NRHP Ref# 80003639
MPS Covered Bridges of Bradford, Sullivan and Lycoming Counties TR
Forksville Covered Bridge is located in Pennsylvania
Forksville Covered Bridge
Location of the Forksville Covered Bridge in Pennsylvania

The Forksville Covered Bridge is a Burr arch truss covered bridge over Loyalsock Creek in the borough of Forksville, Sullivan County, in the U.S. state of Pennsylvania. It was built in 1850 and is 152 feet 11 inches (46.61 m) in length. The bridge was placed on the National Register of Historic Places in 1980. The Forksville bridge is named for the borough it is in, which in turn is named for its location at the confluence or "forks" of the Little Loyalsock and Loyalsock Creeks.

Pennsylvania had the first covered bridge in the United States and the most such bridges in both the 19th and 21st centuries. They were a transition between stone and metal bridges, with the roof and sides protecting the wooden structure from weather. The Forksville bridge is a Burr arch truss type, with a load-bearing arch sandwiching multiple vertical king posts, for strength and rigidity. The building of the Forksville bridge was supervised by the 18-year-old Sadler Rogers, who used his hand-carved model of the structure. It served as the site of a stream gauge from 1908 to 1913 and is still an official Pennsylvania state highway bridge. The United States Department of Transportation Federal Highway Administration uses it as the model of a covered bridge "classic gable roof", and it serves as the logo of a Pennsylvania insurance company.

The bridge was restored in 1970 and 2004 and is still in use, with average daily traffic of 224 vehicles in 2009. Despite the restorations, as of 2009 the bridge structure's sufficiency rating on the National Bridge Inventory was only 17.7 percent and its condition was deemed "basically intolerable requiring high priority of corrective action". It is one of three remaining covered bridges in Sullivan County, and according to Susan M. Zacher's The Covered Bridges of Pennsylvania: A Guide, its location "over the rocky Loyalsock Creek" is "one of the most attractive settings in the state."


...
Wikipedia

...