Focke-Wulf Fw 61

Fw 61
First prototype Fw 61
Role	Helicopter
Manufacturer	Focke-Achgelis
First flight	26 June 1936
Introduction	1936
Primary user	Nazi Germany
Number built	2

The Focke-Wulf Fw 61 is often considered the first practical, functional helicopter, first flown in 1936. It was also known as the Fa 61, as Focke began a new company—Focke-Achgelis—after development had begun.

Professor Henrich Focke, through his development of the Fw 186, and through his work on the C.19 and licence built C.30 autogyros, came to the conclusion that the limitations of autogyros could only be eliminated by an aircraft capable of vertical flight, the helicopter. He and engineer Gerd Achgelis started the design for this helicopter in 1932. A free-flying model, built in 1934 and propelled by a small two-stroke engine, brought the promise of success. Today, the model can be seen in the Deutsches Museum in Munich.

On 9 February 1935, Focke received an order for the building of a prototype, which was designated the Fw 61; Focke referred to it as the F 61. Roluf Lucht of the technical office of the RLM extended the order for a second aircraft on 19 December 1935. The airframe was based on that of a well-tried training aircraft, the Focke-Wulf Fw 44 Stieglitz.

Using rotor technology licensed from the Cierva Autogiro Company, a single, radial engine drove twin rotors, set on tubular steel outriggers to the left and right of the fuselage. Each main rotor consisted of three articulated and tapered blades driven by the engine through gears and shafts. Longitudinal and directional control was achieved using cyclic pitch and asymmetric rotor lift. The counter-rotation of the two rotors solved the problem of torque-reaction as also shown by Louis Bréguet. The small horizontal-axis propeller directly driven by the engine was purely to provide the necessary airflow to cool the engine during low speed or hovering flight and provided negligible forward thrust.

...
Wikipedia