Flange focal depth

For an interchangeable lens camera, the flange focal distance (FFD) (also known as the flange-to-film distance, flange focal depth, flange back distance (FBD), flange focal length (FFL), or register, depending on the usage and source) of a lens mount system is the distance from the mounting flange (the metal ring on the camera and the rear of the lens) to the film plane. This value is different for different camera systems. The range of this distance which will render an image clearly in focus within all focal lengths is usually measured in hundredths of millimeters and is known as the depth of focus (not to be confused with the similarly named depth of field).

This distance influences whether a lens from one system can be mounted with an adaptor to a camera body of another system. In order to produce an adaptor that permits focus to infinity without corrective optics, the flange-to-film distance the lens is designed for must be greater than that of the camera body it is to be adapted to, giving room for the adaptor. Camera systems with a large flange-to-film distance have lenses that can be widely adapted, while those with a small flange-to-film distance can take adaptors for many types of lenses.

If the difference is small, other factors, such as the diameters of the mounting flanges of the two systems, come into play as well. Lens adapters are generally easier to make when the camera body has a large lens mount.

Standard mounts include:

Flange focal distance is one of the most important variables in a system camera, as lens seating errors of as little as 0.01 mm will manifest themselves critically on the imaging plane and focus will not match the lens marks. Professional movie cameras are rigorously tested by rental houses regularly to ensure the distance is properly calibrated. The most common mount is the Arri PL mount with an FFD of 52.00 mm. The Russian OCT-19 has an FFD of 61.00 mm. C-mount (Bolex, éclair and Bell & Howell) has 17.52 mm. Any discrepancies between eye focus and measured focus which manifest them­selves across a range of distances within a single lens may be collimation error with the lens, but if such discrepancies occur across several lenses, it is more likely to be the flange focal distance or the groundglass (or both) which are mis-set.

...
Wikipedia