Filet lace

Filet lace is the general word used for all the different techniques of Embroidery on Knotted Net (or in French Broderie sur Filet Noué). It is a hand made needlework created by weaving or Embroidery using a long blunt needle and a thread on a ground of knotted net lace or Filet Work made of square or diagonal meshes of the same sizes or of different sizes. Lacis uses the same technique but is made on a ground of Leno (a woven fabric) or small canvas (not a knotted lace).

Filet lace is a form of decorative netting and as such can be presumed to have derived at some point from the fishnet that a community would require for fishing, hunting, transporting, etc. and not necessarily because they were living close to the water.

Latin word filatorium place for spinning, from filare to spin, from Latin filum a thread. Ref: Wiktionary, the latin word Filatory) The Latin word filatorium is being used to describe Filet lace then Jourdain (1904) quotes a reference to Exeter Cathedral possessing four pieces of Filet lace in 1327. Ingram (1922) states that there was a "cushion of net-work in St. Paul's Cathedral so [sic] early as 1295." Such work, in the 14th century, was also described as "opus araneum".

Filet-work is the result of knotting a fabric of diagonal or square meshes to create an open fabric called Lace. The tool to make a Knotted Net Lace is a Shuttle-Needle and a Gauge stick for measure of the meshes.

The book Renaissance Patterns for Lace, Embroidery and Needlepoint, an unabridged facsimile of the "Singuliers et nouveaux pourtraicts" of 1587 by Federico de Vinciolo contains approximately 50 beautiful and well designed patterns which are suitable for Filet lace-Embroidery on Knotted Net using the Linen Stitch.

As mentioned above Filet lace is created by doing Embroidery Stitches on a Knotted Net Lace. The knotted ground lace can either be made by the lacemaker or as of 2003 purchased commercially in either handmade or machine-made varieties (available at Filet Lace by the Sea).

Making the net by hand with a Shuttle Needle and a gauge involves anchoring the piece, using either a heavy cushion (which Carità (1909) recommends be made of lead (...!!) but should be replaced by sand or a C clip), a chair or a stirrup around the workers foot. Having a secure anchor against which to maintain tension a square net is made starting from one corner and adding a new mesh on each row until the desired size is reached, then by decreasing. The individual meshes are formed on a gauge which helps ensure a uniform size and are created by knotting to a loop in the previous round: Square mesh, Diagonal mesh, Circular, Free form. By using a very fine thread and different sizes of gauge you will create a beautiful and delicate lace work.

...
Wikipedia