Electrofishing

Electrofishing uses direct current electricity flowing between a submerged cathode and anode. This affects the movement of the fish so that they swim towards the anode where they can be caught.

Electrofishing is a common scientific survey method used to sample fish populations to determine abundance, density, and species composition. When performed correctly, electrofishing results in no permanent harm to fish, which return to their natural state in as little as two minutes after being caught.

Electrofishing relies on two electrodes which deliver direct current at high-voltage from the anode to the cathode through the water. When a fish encounters a large enough potential gradient on this path, it becomes affected by the electricity. Usually pulsed direct current (DC) is applied, which causes galvanotaxis in the fish. Galvanotaxis is uncontrolled muscular convulsion that results in the fish swimming toward the anode. At least two people are required for an effective electrofishing crew: one to operate the anode, and the other to catch the stunned fish with a dip net.

There are three types of electrofishers: backpack models, tote barge models, and boat mounted models, sometimes called a stunboat.

Backpack electrofisher generators are either battery or gas powered. They employ a transformer to pulse the current before it is delivered into the water. The anode is located at the end of a long, 2 meter pole and is usually in the form of a ring. The cathode is a long, 3 meter braided steel cable that trails behind the operator. The electrofisher is operated by a deadman's switch on the anode pole. There are a number of safety features built into newer backpack models, such as audible speakers that sound when the unit is operating, tilt-switches that incapacitate the electrofisher if the backpack is tilted more than 45 degrees, and quick-release straps to enable the user to quickly remove the electrofisher in the event of some emergency.

When boat electrofishing, the boat itself is the cathode, and the anode(s) are generally mounted off the bow. The stunned fish swim toward the anode, where they are caught alive using a dip net. Towed barge electrofishers operate similarly to backpack electrofishers, with the exception that the generator is located on a floating barge instead of on a backpack. Often the barge can be left stationary on the shore and longer cathodes and anodes allow the crew to sample large areas. Barge electrofishers often employ gas-powered generators since a user does not have to carry the extra weight on his or her back.

...
Wikipedia