Electrical fire

Fire class is a term used to denote the type of fire, in relation to the combustion materials which have (or could be) ignited. This has onward impacts on the type of suppression or extinguishing materials which can be used. Class letters are often assigned to the different types of fire, but these differ between territories. There are separate standards in the United States, Europe, and Australia.

Class A fires consist of ordinary combustibles such as wood, paper, fabric, and most kinds of trash.

These are fires whose fuel is flammable or combustible liquid or gas. The US system designates all such fires "Class B". In the European/Australian system, flammable liquids are designated "Class B" having flash point less than 100 °F, while burning gases are separately designated "Class C". These fires follow the same basic fire tetrahedron (heat, fuel, oxygen, chemical reaction) as ordinary combustible fires, except that the fuel in question is a flammable liquid such as gasoline, or gas such as natural gas. A solid stream of water should never be used to extinguish this type because it can cause the fuel to scatter, spreading the flames. The most effective way to extinguish a liquid or gas fueled fire is by inhibiting the chemical chain reaction of the fire, which is done by dry chemical and Halon extinguishing agents, although smothering with CO₂ or, for liquids, foam is also effective. Halon has fallen out of favor in recent times because it is an ozone-depleting material; the Montreal Protocol declares that Halon should no longer be used. Chemicals such as FM-200 are now the recommended halogenated suppressant.

Electrical fires are fires involving potentially energized electrical equipment. The US system designates these "Class C"; the Australian system designates them "Class E". This sort of fire may be caused by short-circuiting machinery or overloaded electrical cables. These fires can be a severe hazard to firefighters using water or other conductive agents, as electricity may be conducted from the fire, through water, to the firefighter's body, and then earth. Electrical shocks have caused many firefighter deaths.

Electrical fire may be fought in the same way as an ordinary combustible fire, but water, foam, and other conductive agents are not to be used. While the fire is or possibly could be electrically energized, it can be fought with any extinguishing agent rated for electrical fire. Carbon dioxide CO₂, NOVEC 1230, FM-200 and dry chemical powder extinguishers such as PKP and even baking soda are especially suited to extinguishing this sort of fire. PKP should be a last resort solution to extinguishing the fire due to its corrosive tendencies. Once electricity is shut off to the equipment involved, it will generally become an ordinary combustible fire.

...
Wikipedia