Drum stool

The drum kit

(1) Bass drum (2) Floor tom (3) Snare drum (4) Hanging toms (5) Hi-hat (6) Crash cymbal (7) Ride cymbal (8) Splash cymbal (9) China cymbal

Not shown

sizzle cymbal swish cymbal crash/ride cymbal cowbell wood block tambourine rototom octoban temple block gong triangle

See also

drum hardware drum stick traps case electronic drum drum machine

Drum hardware refers to the parts of a drum or drum kit that are used to tension, position, and otherwise support the instruments themselves.

Occasionally, the hardware is used percussively as well, the most common example being a rim shot. John Morrison is noted for his drum solos played entirely on a hi-hat stand (and occasionally also on other parts of the kit hardware, adjacent furniture, and audience).

A drum "hoop" or "rim" may be made of metal, wood, or other materials and is used to hold a drumhead against a drum shell, either with bolts through metal "claws" attached directly to a hoop, or bolts through holes in a flanged or die-cast rim. The bolts, called tension rods, are screwed into threaded "lugs" attached to the drum shell, in order to tighten and tune the drumhead. A drum key is a type of wrench often used to screw the tension rods into the lugs.

(tension rod) tension rod washer. this tightens the drum skin and applies pressure around the rim to create the drum's sound

Snare drums will often have a "strainer" on one side and a "butt plate" on the other to hold the snare wires to the drumhead. Snare tension is controlled with a screw on the strainer. A strainer may also have a "throwoff" lever to move snares away from the drumhead, in order to prevent buzzing caused by other bass instruments while the snare is not in use, or to produce a tom-tom sound if desired.

While not required for operation, most drum manufacturers label their products by way of a drum "badge". The badge is a label attached to the drum shell with a grommet, which is embossed with the manufacturer's name or logo, and often a serial number as well. The grommet doubles as a "vent" hole for two-sided drums.

The bass drum(s) in a drum kit usually sit on the floor, and as such require support to prevent rolling. Two adjustable legs are attached by clamps to either side of the shell.

Drum mounts are fittings, normally attached to the drum shell, that enable a drum to be attached to a supporting bracket, stand or rack. Traditionally, smaller tom-tom drums are supported by mounts and known as hanging toms, while snare drums rest on a stand not attached to the drum, and floor toms and bass drums rest on their own legs.

...
Wikipedia