*** Welcome to piglix ***

Downslope creep


Downhill creep, also known as soil creep or commonly just creep, is the slow downward progression of rock and soil down a low grade slope; it can also refer to slow deformation of such materials as a result of prolonged pressure and stress. Creep may appear to an observer to be continuous, but it really is the sum of numerous minute, discrete movements of slope material caused by the force of gravity. Friction, being the primary force to resist gravity, is produced when one body of material slides past another offering a mechanical resistance between the two which acts to hold objects (or slopes) in place. As slope on a hill increases, the gravitational force that is perpendicular to the slope decreases and results in less friction between the material that could cause the slope to slide.

The rate of soil creep down a slope depends on the steepness (gradient) of the slope, water absorption and content, type of sediment and material, and lastly vegetation. The rate of creep will take into account all of these factors to decide whether or not the hillside will progress downward. Creep is what is responsible for the rounded shape of hillsides.

Water is a very important factor when discussing soil deformation and movement. For instance, a sandcastle will only stand up when it is made with damp sand. The water offers cohesion to the sand which binds the sand particles together. However, pouring water over the sandcastle destroys it. This is because the presence of too much water fills the pores between the grains with water creating a slip plane between the particles and offering no cohesion causing them to slip and slide away. This holds true for hillsides and creep as well. The presence of water may help the hillside stay put and give it cohesion, but in a very wet environment or during or after a large amount of precipitation the pores between the grains can become saturated with water and cause the ground to slide along the slip plane it creates.

Creep can also be caused by the expansion of materials such as clay when they are exposed to water. Clay expands when wet, then contracts after drying. The expansion portion pushes downhill, then the contraction results in consolidation at the new offset.

Objects resting on top of the soil are carried by it as it descends down the slope. This can be seen in churchyards, where older headstones are often situated at an angle and several metres away from where they were originally erected.


...
Wikipedia

...