Digital pattern generator

A digital pattern generator is a piece of electronic test equipment or software used to generate digital electronics stimuli. Digital electronics stimuli are a specific kind of electrical waveform varying between two conventional voltages that correspond to two logic states (‘low state’ and ‘high state’, ‘0’ and ‘1’). The main purpose of a digital pattern generator is to stimulate the inputs of a digital electronic device. For that reason, the voltage levels generated by a digital pattern generator are often compatible with digital electronics I/O standards – TTL, LVTTL, LVCMOS and LVDS, for instance.

Digital pattern generators are sometimes referred to as ‘pulse generator’ or ‘pulse pattern generator’ which may be able to function as digital pattern generators as well. Hence, the distinction between the two types of equipment may not be clear. A digital pattern generator is a source of synchronous digital stimulus; the generated signal is interesting for testing digital electronics at logic level - this is why they are also called 'logic source'. A pulse generator is of purpose to generate electrical pulse of different shapes; they are mostly used for tests at an electrical or analog level. Another common name for such equipment is 'digital logic source' or 'logic source'.

Digital pattern generator can produce either repetitive, or single-shot signals in which case some kind of triggering source is required (internal or external).

Digital pattern generators are today available as stand-alone units, add-on hardware modules for other equipment such as a [logic analyzer] or as PC-based equipment.

Stand-alone units are self-contained devices that include everything from the user interface to define the patterns that should be generated to the electronic equipment that actually generates the output signal.

Some test equipment manufacturers propose pattern generators as add-on modules for logic analyzers (see for example the PG3A module for Tektronix' TLA7000 series of logic analyzers). In this case, the pattern generator is the 'generation counterpart' to the analysis functionality offered by logic analyzers.

PC-based digital pattern generators are connected to a PC through peripheral ports such as PCI, USB and/or Ethernet (see for example the 'Wave Generator Xpress' from Byte Paradigm, connected through USB). They use the PC as user interface for defining and storing the digital patterns to be sent.

Digital pattern generators are primarily characterized by a number of digital channels, a maximum rate and the supported voltage standards.

Most digital pattern generator add features such as the ability to generate a repetitive sequence or a digital clock signal at a specified frequency, the ability to use an external clock input and triggering options, to start pattern generation upon the reception of an event from an external input.

...
Wikipedia