Derailment

A derailment is said to take place when a vehicle such as a train runs off its rails. This does not necessarily mean that it leaves its track. Although many derailments are minor, all result in temporary disruption of the proper operation of the railway system, and they are potentially seriously hazardous to human health and safety. Usually, the derailment of a train can be caused by a collision with another object, an operational error, the mechanical failure of tracks, such as broken rails, or the mechanical failure of the wheels. In emergency situations, deliberate derailment with derails or catch points is sometimes used to prevent a more serious accident.

During the 19th century derailments were commonplace, but progressively improved safety measures have resulted in a stable lower level of such incidents. In the US, derailments have dropped dramatically since 1980 from over 3,000 annually (1980) to 1,000 or so in 1986, to about 500 in 2010.

Derailments result from one or more of a number of distinct causes; these may be classified as:

A traditional track structure consists of two rails, fixed at a designated distance apart (known as the track gauge), and supported on transverse sleepers (ties). Some advanced track structures support the rails on a concrete or asphalt slab. The running surface of the rails is required to be practically continuous and of the proper geometrical layout.

In the event of a broken or cracked rail, the rail running surface may be disrupted if a piece has fallen out, or become lodged in an incorrect location, or if a large gap between the remaining rail sections arises. 170 broken (not cracked) rails were reported on Network Rail in the UK in 2008, down from a peak of 988 in 1998/1999.

Derailment may take place due to excessive gauge widening (sometimes known as road spread), in which the sleepers or other fastenings fail to maintain the proper gauge. In lightly engineered track where rails are spiked (dogged) to timber sleepers, spike hold failure may result in rotation outwards of a rail, usually under the aggravating action of crabbing of bogies (trucks) on curves.

The mechanism of gauge widening is usually gradual and relatively slow, but if it is undetected, the final failure often takes place under the effect of some additional factor, such as excess speed, poorly maintained running gear on a vehicle, misalignment of rails, and extreme traction effects (such as high propelling forces). The crabbing effect referred to above is more marked in dry conditions, when the coefficient of friction at the wheel to rail interface is high.

...
Wikipedia