Delayed blowback

Blowback is a system of operation for self-loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gas created by the ignition of the propellant charge.

Several blowback systems exist within this broad principle of operation, each distinguished by the methods used to control bolt movement. In most actions that use blowback operation, the breech is not locked mechanically at the time of firing: the inertia of the bolt and recoil spring(s), relative to the weight of the bullet, delays opening of the breech until the bullet has left the barrel. A few locked breech designs use a form of blowback (example: primer actuation) to perform the unlocking function.

The blowback principle may be considered a simplified form of gas operation, since the cartridge case behaves like a piston driven by the powder gases. Other operating principles for self-loading firearms include blow forward, gas operation, and recoil operation.

The blowback system is generally defined as an operating system in which energy to operate the firearm's various mechanisms and provide automation is derived from the movement of the spent cartridge case pushed out of the chamber by rapidly expanding powder gases. This rearward thrust, imparted against the breech, is a direct result of the expansion of propellant gases. Certain guns will use energy from blowback to perform the entire operating cycle (these are typically designs using relatively "low pressure" ammunition) while others will use a portion of the blowback to operate only certain parts of the cycle or simply use the blowback energy to enhance the operational energy from another system of automatic operation.

What is common to all blowback systems is that the cartridge case must move under the direct action of the powder pressure, therefore any gun in which the bolt is not rigidly locked and permitted to move while there remains powder pressure in the chamber will undergo a degree of blowback action. The energy from the expansion of gases on firing appears in the form of kinetic energy transmitted to the bolt mechanism, which is controlled and used to operate the firearm's operation cycle. The extent to which blowback is employed largely depends on the manner used to control the movement of the bolt and the proportion of energy drawn from other systems of operation. How the movement of the bolt is controlled is where blowback systems differ. Blowback operation is most often divided into three categories, all using residual pressure to complete the cycle of operation: simple blowback (often just "blowback"), delayed/retarded blowback, and advanced primer ignition.

...
Wikipedia