Cut!

In the post-production process of film editing and video editing, a cut is an abrupt, but usually trivial film transition from one sequence to another. It is synonymous with the term edit, though "edit" can imply any number of transitions or effects. The cut, dissolve and wipe serve as the three primary transitions. The term refers to the physical action of cutting film or videotape, but also refers to a similar edit performed in software; it has also become associated with the resulting visual "break".

Due to the short length of early , splicing was necessary to join together segments into long-form. Actuality directors spliced together reels prior to shooting in order to record for longer periods of time. Narrative directors, on the other hand, preferred shooting for shorter lengths, editing together shot footage. In either case, film was cut (and subsequently joining the cut segments) in order to remove excess footage, focusing attention on significant elements.

The cut has retained its purpose to this day, with alternative uses arising to achieve special effects.

To signal the end of media capture, this command is issued primarily by the director, to cast and crew. (It is very unusual for others to yell "cut" without an exceptional reason; mistakes are reshot during the same take, if possible.) In contrast, a "roll" command signals the beginning of shooting.

In between these commands and the actual footage to be captured, various marking elements (the slate), preparatory actions (extras, effects, or other costly elements), and the director's "Action!" command are also recorded. These are edited out in order to effect a seamless presentation.

In practice, the cut does not break the suspension of disbelief necessary to keep an audience engaged to a narrative or program. The cut represents a continuous transition in setting and time—in turn, the dissolve and wipe respectively identify changes in time and setting. In many cases, cuts are also used in place of dissolves or wipes for minor changes, or to edit away insignificant details in order to maintain pace. Usage of the cut in this manner conforms to the goals of continuity editing, which deemphasizes the presence of the film crew.

...
Wikipedia