Coffee preparation
 SCAA brew chart (American) |
|
|
SCAE brew chart (European) |
|
|
NCA brew chart (Norwegian) |
Coffee preparation is the process of turning coffee beans into a beverage. While the particular steps vary with the type of coffee and with the raw materials, the process includes four basic steps; raw coffee beans must be roasted, the roasted coffee beans must then be ground, the ground coffee must then be mixed with hot water for a certain time (brewed), and finally the liquid coffee must be separated from the used grounds.
Coffee is usually brewed immediately before drinking. In most areas, coffee may be purchased unprocessed, or already roasted, or already roasted and ground. Coffee is often vacuum packed to prevent oxidation and lengthen its shelf life.
Roasting coffee transforms the chemical and physical properties of green coffee beans. When roasted, the green coffee bean expands to nearly double its original size, changing in color and density. As the bean absorbs heat, its color shifts to yellow, then to a light "cinnamon" brown, and then to a rich dark brown color. During roasting, oils appear on the surface of the bean. The roast will continue to darken until it is removed from the heat source.
Coffee can be roasted with ordinary kitchen equipment (frying pan, grill, oven, popcorn popper) or by specialised appliances. A coffee roaster is a special pan or apparatus suitable to heat up and roast green coffee beans.
The whole coffee beans are ground, also known as milling, to facilitate the brewing process.
The fineness of the grind strongly affects brewing. Brewing methods that expose coffee grounds to heated water for longer require a coarser grind than faster brewing methods. Beans that are too finely ground for the brewing method in which they are used will expose too much surface area to the heated water and produce a bitter, harsh, "over-extracted" taste. At the other extreme, an overly coarse grind will produce weak coffee unless more is used. Due to the importance of a grind's fineness, a uniform grind is highly desirable.
If a brewing method is used in which the time of exposure of the ground coffee to the heated water is adjustable, then a short brewing time can be used for finely ground coffee. This produces coffee of equal flavor yet uses less ground coffee. A blade grinder does not cause frictional heat buildup in the ground coffee unless used to grind very large amounts as in a commercial operation. A fine grind allows the most efficient extraction but coffee ground too finely will slow down filtration or screening.
...
Wikipedia