Chancy Lamb

Chancy R. Lamb
Portrait of Chancy Lamb
Born	4 January 1816 Ticonderoga, New York
Died	12 July 1897 Clinton, Iowa
Occupation	Industrialist, lumber baron
Spouse(s)	Jane Bevier
Children	Artemus, Augusta, Lafayette, Emma, Celeste, Merrette
Parent(s)	Alpheus Lamb & Sophia Bailey

Chancy Lamb was a pioneer in the lumber industry in Clinton, Iowa.

Chancy Lamb was born in Ticonderoga, New York, January 4, 1816. He was the son of Alpheus and Mrs. Sophia (Bailey – Wilkerson) Lamb. His father was a descendent of Thomas Lamb, who came from England with Governor Winthrop’s fleet in 1630, and settled at Roxbury, Massachusetts. Chancy Lamb spent his early life on a farm, enjoying an occasional winter of schooling in the common schools of the neighborhood. In 1836 he went to Benton, New York, where he engaged in the manufacture of wagons, and, as well, learned the trade of millwright. Two years later, in 1838, he moved to Bradford, New York, where he went to work in a saw mill, and for the next three years was thus engaged, the larger portion of the time sawing by the thousand. In the summer of 1841 he commenced the construction of a saw mill on the outlet of Lake Keuka, near Penn Yan, New York for R.L. Chapman of Steuben County, New York completing it in the spring of 1842, during which season he operated the mill under contract with the owner. In November of that year he returned with his family to Bradford, where he took a contract to run the saw mill of Cameron, Thurman & Co., and continued in the capacity of superintendent with this firm until the summer of 1844, when he moved with his family to Carroll county, Illinois, where he spent several years in farming.

In 1851 he moved to Williamsport, Pennsylvania, and accepted the position of superintendent in the mill operations of his former employer, J.C. Cameron & Co., and in the following year operated the mills of this company in Chemung County, New York, sawing by the thousand and continuing in this business for the next five years.

In November, 1856, Mr. Lamb again moved west, and for a few months was a resident of Fulton, Illinois, but in 1857 he took possession of the saw mill at Clinton, which he purchased from Gray & Lunt, and which he had helped to build. This mill burned October 6, 1857, and Mr. Lamb at once erected a much better mill, which he operated until November 14, 1876, when it, too, was destroyed by fire. In March, 1868, he laid the foundations of a stone structure saw mill, which went into commission in September of the same year, which, with the rebuilt mill which replaced the one which was burned, and the subsequent acquisition of the Cobb mill and Wheeler & Warner mill, produced about 100,000,000 board feet (200,000 m³) of lumber and 50,000,000 shingles a year.