Cessna CH-1
| CH-1 Skyhook YH-41 Seneca |
|
|---|---|
 |
|
| CH-1B designated YH-41 | |
| Role | Light helicopter |
| National origin | United States |
| Manufacturer | Cessna |
| Designer | Richard Ten Eyck |
| First flight | July 1953 |
| Introduction | 1956 |
| Status | Production ended December 1962 |
| Unit cost |
US$79,960 (1961)
|
| Developed from | Seibel S-4 |
The Cessna CH-1 Skyhook is the only helicopter ever built by the Cessna Aircraft Company. It was the first helicopter to land on the summit of Pike's Peak and the last piston-engined helicopter to set the helicopter altitude record. The CH-1 had a single, two-bladed main rotor, and a front-mounted reciprocating engine which gave the aircraft a stable center-of-gravity (CG). Its semi-monocoque airframe greatly resembles its light airplane siblings built by Cessna. The CH-1 was named Skyhook for the civil market, similar to the marketing names used in the Cessna single engine airplane line, such as Skyhawk, Skylane and Skywagon. The United States Army designated the CH-1C as the YH-41 Seneca. While the CH-1 achieved several helicopter "firsts" and set a world record, it never became a commercial or military success.
Cessna Aircraft Company acquired the Seibel Helicopter Company of Wichita, Kansas on 14 January 1952 through a stock swap with Seibel investors. All equipment from the Seibel Helicopter Company, including the Seibel S-4B, was moved to Cessna's Pawnee Plant in Wichita and work began on the CH-1 design during the summer of 1952. Charles Seibel, who became the new Helicopter Division's chief engineer as part of the acquisition, believed that the S-4B with a Cessna body would make an excellent helicopter. Cessna pilots test flew Seibel's S-4B for several months to familiarize the engineers with helicopters, and then it was scrapped.
A quarter-size wind tunnel model of the CH-1 was created and tests were conducted at Wichita State University. The first full-size machine did not have an enclosed fuselage or cowling, nor a horizontal stabilizer. This test bed skeleton, referred to as CH1-1, first hovered in July 1953, eventually making test flights as high as 10,000 feet (3,000 m). The actual prototype CH-1 was built based on modifications made to the test bed aircraft and this second ship made its first flight in 1954, at the Prospect plant.
On 9 June 1955, the CH-1 received CAA type-certificate 3H10. Originally certified as a two-place helicopter, stability problems at higher gross weights required additional engineering solutions. A larger, free-floating horizontal stabilizer was introduced. During forward flight, the stabilizer pivoted to a variable mechanical stop, which was linked to the fore and aft cyclic control, thereby altering the stabilizer angle of incidence during flight. Reworking the stabilizer permitted the addition of a second row of seating, and the four-place ship, designated the CH-1A, was certificated on 28 February 1956.
...
Wikipedia